Midwest Success Series Manual

Ae'ro-Star
About This Construction Manual
®
Success Serles
1ete and fU\ly
'fh\s k\t
features a co:: construction
Illustrated st<NDp-bYfUi~-slte plan• that
manua\·A •
ASSUIIE SUCCESS\
Kit #178
Outshines
All Other
R/C Trainers
This booklet divides the construction into sub-assemblies; wing, fuselage, etc. Read each
section carefully and identify all of the parts before starting on a particular sub-assembly. There is
a complete description of all kit parts under "Kit Contents", (Pages #3 - #6). Please check to be
sure that your kit is complete; that is not missing any parts. If you do find that parts are missing,
or you are having trouble identifying parts, see "Customer Service" (below). The instructions give
the sizes of all the parts. Refer back to the "Kit Contents" when selecting parts, to be sure that you
are using the correct sizes.
This manual shows dimensions in inches and metric, the metric dimensions being given in
parenthesis following the inch figures. Example: 3" (76mm) Since there is rarely a direct inch to
metric conversion, in many cases a close approximation is quoted.
The illustrations in this manua I clarify and detail many of the assemblies shown on the plan, and
the two should be used together during construction.
Customer Service
Should you experience a problem with this Id~ we recommend you see your dealer first. If you
are unable
to
solve the problem, feel free to call or write:
Customer Service Department
Midwest Products Co., Inc.
P.O.Box564
Hobart, IN 46342
(219) 942-1134
400 S. Indiana St. P.O. Box 564 Hobart, IN 46342
This product is sold with exdusion of all warranty expressed or
implied, statutory or otherwise. Buyer assumes all risk of use.
P-427