Picture Control; Using Automatic Picture Settings - Samsung HL-T5076S Owner's Instructions Manual

Picture Control

Using Automatic Picture Settings

Your TV has three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button.
Press the ENTER button to select Picture.
Press the ▲ or ▼ button to select Mode, then press the ENTER button.
2 Press the ▲ or ▼ button to select Dynamic, Standard, or Movie, then press the ENTER
button.
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for general TV watching mode.
 Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or Tint, then
press the ENTER button.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
➢ ● In PC mode, only the Contrast and Brightness can be selected.
● Each adjusted setting will be stored separately according to its input mode.
● When you make changes to Contrast, Brightness, Sharpness, Color, or Tint,
OSD color will also be adjusted accordingly.
English - 27
Continued...