Subscribe to Our Youtube Channel
Summary of Contents for Aerpro AVMD4
- Page 1 ADVANCED SAFETY VISION SYSTEMS AVMD4 HEAVY DUTY 4 CHANNEL AHD MOBILE DVR USER MANUAL 12 24V COMPATIBLE RECORDING 07-08-2024...
-
Page 2: Table Of Contents
ADVANCED SAFETY VISION SYSTEMS Contents Product overview..........1 Inclusions..............2 Powering your device..........3 Adding a hardrive..........4 Remote controller function........5 Main menu screen..........6 Playback Menu.............6 General menu screen..........9 Control screen menu...........14 Record settings screen menu......19 System settings menu.........22 1TB recording time chart........23 Specifications............24 Reversing trigger or power camera systems..25 Technical assistance...........26... -
Page 3: Product Overview
ADVANCED SAFETY VISION SYSTEMS Product overview 1. Hardrive access 6. HDD indicator 13. CH4 camera input 2. USB port (Mouse, Backup 7. Not applicable 14. Prolink composite output thumb drive or firmare 8. GPS antenna connection 15. Power harness updates 9. -
Page 4: Inclusions
ADVANCED SAFETY VISION SYSTEMS Inclusions 4 Channel Heavy Duty M-DVR AVMD4 1 x Remote Control 1 x GPS antenna 1 x Key to lock HDD 1 x HDD mounting plate 4 x HDD mounting screws 2 x 20cm input/output cables... -
Page 5: Powering Your Device
Powering your device The Aerpro AVMD4 can me powered by using the 4 plug power input cable. For video input from your monitor it can be connected via the HDMI, VGA or Prolink 2 connections. Cables are not included. For the Prolink composite output, model number PLAC42 is sold separately. -
Page 6: Adding A Hardrive
1. To access the storage areas the supplied HDD lock key must be used open the front. 2. Mount the Hardrive onto the HDD mounting plate using the 4 screws provided. 3. Note the direction the HDD is placed in the AVMD4. 4. Lock and secure using the HDD key. -
Page 7: Remote Controller Function
ADVANCED SAFETY VISION SYSTEMS Remote controller function 1. ON/OFF 5. Menu 9. Delete 2. System information interface 6. OK, Up, Down, Left, 10. 0-9 number keys 3. Play, pause, rewind, Right arrow keys Split mode interface fast forward keys 7. Return to the previous 1-8 Key channels 4. -
Page 8: Main Menu Screen
ADVANCED SAFETY VISION SYSTEMS Main menu screen Once connected to a monitor, press the MENU button on the remote to display the main menu screen. This allows the user to access the MDVR’s sub menu system.z Playback Menu... - Page 9 ADVANCED SAFETY VISION SYSTEMS Playback Menu cont... Search for date: Allows the user to search for recorded files via dates. Select All or Alarm Footage: Will show all the recording list, selecting Alarm will list all alarm triggers list.
- Page 10 ADVANCED SAFETY VISION SYSTEMS Playback Menu cont... Channel: Select channels: CH01, CH02, CH03 or CH04 for individual playback list. Main record: Select Backup Record or Mirror Record to access the recorded footage from the SSD drive.
-
Page 11: General Menu Screen
ADVANCED SAFETY VISION SYSTEMS General menu screen Date/Time settings: •Time setting date format: D-M-Y, Y-M-D, M-D-Y hh;mm;ss •Time show: Enable or Disable time and date on display. •DST: Enable/disable Day light saving time •Timing Model: 2 settings to adjust time, time from GPS will automatically sync time or entered manually. - Page 12 ADVANCED SAFETY VISION SYSTEMS General menu cont... Channel Title: CH01/CH02/CH03/CH04 or Front/Rear/Left/Right is displayed on the live view screen, you can disable this function. Video format: The user can change the recorded video format to PAL or NTSC...
- Page 13 ADVANCED SAFETY VISION SYSTEMS General menu cont... Resolution: The user can changes the screen resolution 1024x768, 1280x720, 1920x1080 Video input format : The user can choose the input resolution according to the cameras you are going to install, you can set it on Auto, this will auto detect the cameras automatically. NOTE all cameras must be the same resolution when the setting on Auto, AHD-720P25, 720P30, AHD-1080P25, 1080P30, TVI-720P25, 720P30, 1080P25, 1080P30, CVBS PAL, NTSC.
- Page 14 ADVANCED SAFETY VISION SYSTEMS General menu cont... Language: Choose from multiple languages, Chinese simplified, Traditional Chinese, English, Korean, Russian etc. Display GPS speed: Enable or Disable the speed being displayed on recordings.
- Page 15 ADVANCED SAFETY VISION SYSTEMS General menu cont... Power on-off Voltage: Default setting is"off". If 12V is selected, the switching voltage range is between 9V-36V. If 24V is selected the voltage range is between 23V-36V. Plate number: The user can type words or numbers, this will show on the recordings as a water mark.
-
Page 16: Control Screen Menu
ADVANCED SAFETY VISION SYSTEMS Control screen menu Guide lines: The user can enable or disable the Guide line. You can assign which channel you want the guide lines to be on. You can adjust the lines with highlighting X,Y,or W use the remote or mouse to shift up, down, left or right icon on the screen. - Page 17 ADVANCED SAFETY VISION SYSTEMS Control menu cont... Screen margin: Allows you to adjust the margins to fit on the screen. Display settings: Disable/Enable password. You can add your own password as Administrator as well as as Normal user. Default password is 111111. User login is to access the menu but cannot change settings, Admin has full access to all settings.
- Page 18 ADVANCED SAFETY VISION SYSTEMS Control menu cont... Alarm input triggers: I/O: IN1-IN4 corresponding trigger lines Sensor IN1-Sensor IN4. •Enable: Enable/disable the trigger function of the corresponding trigger line. •Anti-shake: Set the time to continuously receive voltage when trigger line is triggered. •Delay: Set the time to continuously display the screen after exiting the trigger.
- Page 19 ADVANCED SAFETY VISION SYSTEMS Control menu cont... Video detection: •Channel: CH01 to CH04 •Switch: Enable/Disable the trigger function of the corresponding trigger line. •Limit: Set settings such as 10-90. •Delay: Set the time to keep displaying the screen after exiting the trigger. •Sensitivity: Set low, middle and high frequency.
- Page 20 ADVANCED SAFETY VISION SYSTEMS Control menu cont... Border color: The user can change the colour of the borders to Gray, Black, Red, Green, Blue, None. Power off for park recording: When you set the time to (10 min or higher) the device is recording without shutting down after the time is reached the power will shut down.
-
Page 21: Record Settings Screen Menu
ADVANCED SAFETY VISION SYSTEMS Control menu cont... Record for park recording: When you set the time to (10 min or higher) this will keep recording after the car is turned off. Record settings screen menu... - Page 22 ADVANCED SAFETY VISION SYSTEMS Record settings menu cont... Mirror Config: The user can Mirror the image, Flip the image, rotate the image 90° or 270° You can add this to 4 channels separately. Video adjust : Allows the user to adjust the box size for each 4 channel you can adjust by using the remote arrow up to scroll between 0-85 on each Top, Bottom, Left, and Right box.
- Page 23 ADVANCED SAFETY VISION SYSTEMS Record settings menu cont... Color config: Adjust the Brightness, Contrast, Chroma, Saturation, Sharpness. Encode setting: This allows the user to change the resolution to 1080p, 720p or D1. You can change the frame rate from 1 to 15 and the quality of the recordings can be adjusted to Ordinary, Standard, High definition or Super high definition.
-
Page 24: System Settings Menu
ADVANCED SAFETY VISION SYSTEMS Record menu cont... Recording Manage: “Disk Usage". The user can set different usage for different storage disks, which are main record, backup record and mirror record respectively. ① If all the settings are set as main video, then when disk1 space is full of recorded files, it will continue to record on the next video disk. -
Page 25: 1Tb Recording Time Chart
ADVANCED SAFETY VISION SYSTEMS 1TB recording time chart... -
Page 26: Specifications
• Power Supply: 9-36V (Hardwired) • Dimensions (WxHxD): 175 x 168 x 50mm • Weight: 0.88kg • Inclusions: ° 4 Channel Heavy Duty M-DVR [AVMD4](https://aerpro.com/AVMD4) ° 1 x Remote Control ° 1 x Key to lock HDD ° 2 x 20cm input/output cables Additional Information: °... -
Page 27: Reversing Trigger Or Power Camera Systems
ADVANCED SAFETY VISION SYSTEMS How to find reversing wires to trigger or power camera systems. We recommend that you wire up the triggers as the last part of your installation (after the systems monitor has been wired) this is so that you can use the system as a safe way to test for a reversing wire. -
Page 28: Technical Assistance
ADVANCED SAFETY VISION SYSTEMS Technical assistance If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support. Australia TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST or EMAIL: service@tdj.com.au If you would like to download a digital copy of this manual, or other Aerpro manuals/software, please visit the Aerpro.com website and search for the product...
Need help?
Do you have a question about the AVMD4 and is the answer not in the manual?
Questions and answers