Summary of Contents for Armorgard strimmersafe rack SSR
- Page 1 ™ Model Number SSR Instructions for setting up your Armorgard StrimmerSafe Rack SSR...
- Page 2 - 18 x M8 x 20 Bolts - 1 x Right Upright Section - 18 x M8 Nylocks - 1 x Base Section - 3 x Keys Any questions on setting up your StrimmerSafe Rack, please call Armorgard on 023 9238 0280...
-
Page 3: Safety Information
Safety Information Take extra care when raising the unit from the ground. Ensure the unit is placed on flat, even surface. Position the unit with its back to solid wall. If unsecured, the StrimmerSafe Rack can overbalance. For your safety, you should always fix the StrimmerSafe Rack to a solid wall and ensure it is fully supported. - Page 4 Fix the base unit to the two side panels using 3 of the M8 x 20 bolts and Nylocks on each of the upright arms. Any questions on setting up your StrimmerSafe Rack, please call Armorgard on 023 9238 0280...
- Page 5 For more information on installing your StrimmerSafe Rack, call us on 023 9238 0280. ticking every box. Attach the cross brace using 2 of the M8 x 20 bolts and Nylocks each side. Ensure all fixings are secure and tight.
-
Page 6: General Information
Lost Keys? Replacement keys can be purchased from Armorgard, using the serial number on the product. For added security, register your key serial number at: www.armorgard.co.uk/product-registration Any questions on setting up your StrimmerSafe Rack, please call Armorgard on 023 9238 0280... - Page 7 View our full range of products online at www.armorgard.co.uk...
- Page 8 Unit 14-16, Standard Way, Fareham Industrial Park, Fareham, Hampshire PO16 8XB call 023 9238 0280 email sales@armorgard.co.uk www.armorgard.co.uk...
Need help?
Do you have a question about the strimmersafe rack SSR and is the answer not in the manual?
Questions and answers