The perfect solution for cleaning heavily soiled windows.
The H
F
S
I
LO
OAP
L
cleaner. When used with pure water, E
IQUID
results of cleaning windows/surfaces that have never been cleaned with pure
water before and problem windows that do not sheet properly.
Recommended Usage:
Heavily soiled windows.
How to Install the HiFlo Soap Dispenser:
• Connect the HiFlo SoapDispenser between the pole and water purifi cation system.
Never connect the soap dispenser in front of the water fi lter.
• Install using standard fi ttings.
(Connections to pole shown below)
EU connector
Connect waterline here.
How to Add Soap:
• Remove the cap as shown and add soap.
The soap output depends on the water fl ow rate.
Depending on water pressure and the quantity of
soap added, the concentration of soap will vary.
Raise the soap concentration by reducing the
water fl ow or adding more soap.
Helpful Tips:
• ALWAYS use as little soap as possible.
• Start with a low soap concentration and regulate the water fl ow with the
valve to gain the desired results.
• DO NOT allow the unit to drag on the ground especially on concrete surfaces.
• DO NOT connect the soap dispenser directly to water source or water purifi cation system.
• DO NOT pressurize more that 50 psi (3.5 bar) of pressure.
• DO NOT use soap dispenser in a vertical position.
• DO use a short fl exible hose (12 inches) between the water supply and the soap dispenser.
• Inspect the soil level and surface type before adding soap.
Operating the dispenser
1. To add soap, turn valve to the "SOAP" position.
2. When soap is not required, turn the valve to the "WATER" position.
3. To stop the fl ow of water, turn valve to the center position.
1.
SOAP Position:
Controls amount of soap
Please Note:
E
G
/L
ASY
LIDE
IQUID
mation on E
G
ASY
ungerglobal.com to download an MSDS sheet. The H
recommended for use with any other cleansers or solutions.
D
is designed to be used with Unger's E
ISPENSER
USA connector
2.
WATER Position:
Only water fl ows.
is a safe, pH-neutral liquid soap. For more detailed infor-
/L
, see product label or visit us online at www.
LIDE
IQUID
www.ungerglobal.com
H
F
S
™
I
LO
- Instructions -
G
ASY
EU connector
USA connector
Connect pole here.
I
D
OAP
ISPENSER
ASY
/L
maximizes the
LIDE
IQUID
3.
OFF Position:
No fl ow.
F
S
D
LO
OAP
ISPENSER
Literature: #15271
EUR: HCDEU
USA: HCDUS
G
/
LIDE
is not
Need help?
Do you have a question about the HiFlo SoapDispenser and is the answer not in the manual?
Questions and answers