Advertisement
Quick Links
MultiDOT
Temperature and Humidity Sensor
Pack Contains:
1x MultiDOT, 1x Adhesive Pad, 1x Stand
Safety and Guidelines
MultiDOT requires BCM for operation and is
intended for internal use only.
MultiDOT requires a good ZigBee connection
with BCM. Once joined the connection strength
is shown on screen by the signal bars.
Compatibility
The MultiDOT is an ancillary device for use in
conjunction with BCM. MultiDOT wirelessly
connects using the ZigBee protocol to BCM
For more information, get in touch with us via
our website: www.vericonsystems.com
Device Information
MultiDOT
Model: MDA
Required Batteries: 2x AAA Batteries
Zigbee 802.15.4 Compatible
Vericon Systems
Unit 5, Churchill Industrial Estate, Churchill Road,
Cheltenham, GL53 7EG.
www.vericonsystems.com
Support: support@vericonsystems.com or visit our
website.
Advertisement
Summary of Contents for Vericon Systems MultiDOT MDA
- Page 1 Zigbee 802.15.4 Compatible with BCM. Once joined the connection strength is shown on screen by the signal bars. Compatibility Vericon Systems The MultiDOT is an ancillary device for use in Unit 5, Churchill Industrial Estate, Churchill Road, conjunction with BCM. MultiDOT wirelessly Cheltenham, GL53 7EG.
- Page 2 Installation Installation FAQ and Troubleshooting Where should MultiDOT be situated? 6. Input MultiDOT’s serial number. 1. Insert two AAA batteries into MultiDOT and MultiDOT should be placed near any areas which (This is located in the battery compartment) replace the cover. have an issue with mould, damp or condensation.
Need help?
Do you have a question about the MultiDOT MDA and is the answer not in the manual?
Questions and answers