Table of Contents
Advertisement
Speaker Assembly Method
Installing speakers in the RRSS
Installing the Front/Rear speakers together on the wall
Follow the instruction and install the
speakers
shown below.
1
Install the rear
speaker on the front
Rear Speaker
speaker.
Front Speaker
3
Fasten 2 screws
(separated) on the
wall.
28cm
•
To avoid personal injury or damage to the speakers w hen installed on the wall,
Caution
make sure to tightly fasten the speakers so they will not fall down.
15
(Con't)
(Rear Reflecting Surround System)
as
2
Connect the
rear
and front
speaker wires to
to
the rear of
front speaker.
4
Hang the front/rear speaker
on the wall.
Fit the speaker
hole into the screw
on the wall to hang
(mount) the speaker.
Configuration using wall mounts
Installing speakers in the SDSM
Installing the Front and Rear speakers on stands
Follow the
instructions
and install the
speakers
as shown below.
1
Install the front
speaker on the front
stand.
Rear Speaker
wire
Front Speaker
wire
3
Insert the front
speaker cover on
the front speaker.
5
Insert the rear
speaker on rear
stand.
Configuration using stands
(Super Digital Sound Master)
2
Turn the screw on the
rear of front speaker
Front Speaker
to fasten it.
Front Stand
4
Connect the
Front Speaker Cover
front speaker
wire
to
the rear
of front stand.
Front Speaker
6
Connect the rear speaker wire
Rear Speaker
rear stand.
Rear Stand
bottom of rear stand
Phillips
Screwdriver
Front Speaker wire
to
the bottom of
Rear Speaker wire
16
Advertisement
Table of Contents
