Radium RSTA4310 User Manual

Read all instructions before using or installing the product. Keep for future reference.
Include the user manual when passing the product on to third parties.
Product introduction
Article No. Product Name
RSTA4310 LED STRIP 500 EH RGBWW/24V 10M
RSTA4315 LED STRIP 500ZP EH RGBWW/24V 5M
RSTA4313 LED STRIP 500ZP EH RGBWW/24V 3M COB
RSTA4311 LED STRIP 500ZP EH RGBWW/24V 1M
• Type: COB = Chip On Board; SMD = Surface Mount Device
• 5 m (5000 mm) and 10 m (10000 mm) light reels have plugs on both ends.
• TA (ambient temperature) of all models: -20–50 °C
Handling/installing the product
• The product must be fully unfolded for use.
• Only use the product indoors. Do not expose
the product to moisture.
• Clean the mouting surfaces before installation.
Ensure that the mounting surface is clean and
smooth (free of grease, oil, silicone and dirt
particles).
• Protect the product against mechanical and
electrostatic loads when installed.
• Ensure the protective tape is completely
removed before installation.
• The product is mounted using the double-sided
adhesion tape on the back side.
Type L × W × H (mm) V
SMD 10000 × 12 × 2.1 24
COB 5000 × 12 × 2.8 24
3000 × 12 × 2.8 24
COB 1000 × 12 × 2.8 24
• Do not bend the product sharply. Do not bend at
the LED light.
R > 30 mm
• Do not twist the product.
• Cut the product at a right angle.
RGBW LED strip lights
User manual
W W/m lm lm/m K
80 8 4240 424
50 10 2500 500
30 10 1500 500
10 10 500 500
OKM 4103592 000 AA V01
various models
Max.
usable
length
(m)
RGB/2700 10
RGB/2700 5
RGB/2700 5
RGB/2700 5
1