Summary of Contents for Promounts OATI-001M
- Page 1 Instruction manual Before using the product, please read this instruction manual carefully and keep it for future reference.
-
Page 2: Product Accessories
Product accessories High-pressure air Charging Nozzle� Air needle� Air nozzle� inflation tube� cable� Safety hammer� Storage bag� Anti-scalding silicone� Basic parameters Product Model OATI-���M Product Size ��*��*���mm Rated Voltage DC�.�V Rated input �V �A Rated Power ��W ���g Product N.W. Cylinder Inner ��mm Diameter... -
Page 3: Component Description
� � � � � � � � � �� �� �� �� �� �� Component description Nozzle adapter High-pressure air inflation tube � � Air tube interface Light / SOS � � Air tube storage Mode Selected � � compartment Tire pressure display Heat vent... - Page 4 Instruction manual �.Charging Please fully charge before using it for the first time. Use the charging cable to connect the �V USB adapter to charge the inflator. Tips For the longer battery life, charge fully every month �.Power display The battery is displayed as three cells,and the number of lit cells represents the remaining power .
-
Page 5: Mode Switching
�.Preset Modes Mode switching Short press mode button “ ” to toggle between different preset modes on the display. Hold down the mode button before inflating to toggle between bar, psi, Kpa, kg/cm² Free mode: Free pressure mode: when there are no icons displayed on the left side of the air pump screen, the preset pressure can be adjusted freely. - Page 6 �.Can be used as a power bank The tire inflator can be used as a �V/�A power bank. Hold down the power button to power on and start charging. �.Detect air pressure This tire inflator can display the current air pressure of the tire, ball, or pool inflatables that it is connected to.
Need help?
Do you have a question about the OATI-001M and is the answer not in the manual?
Questions and answers