Table of Contents
Advertisement
NEO:6 Mode
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
REMOTE CONTROL
1
To Exit Setup Mode
Wait for about 5 seconds.
•
•
NEO:6 Mode can be used with DTS and Dolby
Digital multi channel signals.
Pro Logic works only for PCM audio signals with
•
sampling frequency of 32KHz, 44KHz or 48KHz.
33
Press NEO:6 MODE button.
Each time you press this button, MUSIC
CINEMA will be selected in turn.
•
NEO : 6 Mode
This mode decodes 2 channel signals to high precision digital matrix
decoder.
DTS NEO:6 decoder discretes 2 channel sound to Discrete 6.1
channel sound.
MUSIC : NEO:6 MUSIC Mode is optimized for music playback
•
•
CINEMA : NEO:6 CINEMA Mode is optimized for movie playback.
MAIN UNIT
1
Press SURROUND button briefly to select "NEO:6" Mode.
Each time you press this button, DPL ll x
NEO:6
•
selected in turn.
2
Press SELECT(
,
) button.
•
Each time you press this button, MUSIC
CINEMA will be selected in turn.
To Set Sound Image of Center Speaker
If TV (or screen) is installed high on a wall, you can raise the sound image
of the Center Speaker to compensate.
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 10 times.
•
"NEO:6 MODE" appears on the display.
3
Press SURROUND button.
"CEN-IMG" appears on the display.
•
4
Press SELECT(
) button to set the sound image you want.
,
•
You can set the sound image from 0 to 5.
To Exit Setup Mode
•
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. 'SETUP MODE OFF' appears
on the display and exits Setup Mode.
You can use this function to set the sound image of Center Speaker
•
only via the main unit.
SFE
STEREO will be
34
Advertisement
Table of Contents
