1、Description →The GAZELLE G9645 is a manual foot operated hydraulic pump designed for operating of crimping and cutting heads for cable termination or cable cutting activities. →Do not pump up oil pressure without having the correct crimp head or cutter properly connected to the pump.
3、Usage →When connecting an crimp head or cable cutter. It is important to ensure the correct quick coupling function. This is done by making sure that the coupling halves are fully engaged to each other. →When using the pump. try to place it on an even and horizontal surface in order to avoid tilting.
“ears” on the footplate. The pedal can be fixed in its lower position. 4、Maintenance →The GAZELLE G9645 is made from a surface treated aluminum alloy and requires only a limited amount of care. It should however always be kept clean and free from dirt. This is particularly important when it comes to both sides of the quick coupling and the pedals rolling shaft acting on the pump piston.
Contact your supplier directly for more information. →The design and function inside the GAZLLE G9645 is complicated and there is nothing one can do without access to special equipment. Therefore, do not try to repair possible...
Page 7
We shall in no event be liable for death, injuries to persons or property from the improper use and lack of maintenance of our product. Any doubt of safety operation and precaution, please contact with our distributor. Please properly dispose of all packing materials and removed parts.
Need help?
Do you have a question about the G9645 and is the answer not in the manual?
Questions and answers