Pioneer SA-8800 Operating Instructions Manual

STEREO AMPLIFIER
QPIONEER'
A-8800__
'These operating instructions are based on she model HG,
and they can be used for the 8, S/G models. The differences
bbatween the models are given below.
Fower requirements
SA8800/HG: 220/240 (switchable), 50H, 60H
SA.R8O0/S, S/G; 110V/120V/220V/240¥ (ewitehable),
50Fiz, 60H2
Nore:
Read through the section on the LINE VOLTAGE SE
LECTOR SWITCH on page 6 before using your amplifier
and check that the voltage selector switch is set correctly
forse inyour area
Fower cords
SA-BAO0/HG: This is configured as an AC inlet type
Use a neparate power cord in ordor to
connect the power supply
Tae power cord is mounted at the SA-8800/8, SIC
Cabinet
SA-8800/HG, 8; Black cabinet
SA-8800/S/G: Walnut grained finished cabinet
Others
SASBO0/HG: ' T h e DIN-Iype recording/playback.
socket is provided on the rear panel
The AC outlets are provided on the
rear panel
SA-8800)8, S16:
IMPORTANT
To prevent electric shock, do not remoue cover. No user
seroeenble parte inside, refer servicing to qualified ver
ie personnel
Always disconnect el the equipment from the mains
'supply when disconnecting the signal teads. The power
'cord ehould be connected iast, make sure thet the power
switch is off, First, insert tne female appliance connector
of tte mains cord mio the AC INLET, then plug the
cord to the wall socket, Be sure that the appliance con:
'nestor ia fully inserted into the AC INLET.
Unplug the sec from the wail socket when itis not fo be
used for an extended period of time,
WARNING
THIS APPARATUS MUST BE EARTHED.
POR YOUR SAFETY
Insert this plug only into effectively earthed threepin
plug-socket outlet
If ony doubt exists regarding the earthing, consult a
'qualified electrivien
Extension cords, ifused, must be Uhree-core comectly
wired,
FOR USE IN UNITED KINGDOM AND
AUSTRALIA
CAUTION 240V: Mains supply voltage is facto-
ry adjusted at 240V.
FOR USE IN UNITED KINGDOM
'The sires in this mains lead are coloured in accondonce
with the following code:
Greenand-Yellow: Barth
Blue: Neutral
Brown Live
The wire which le coloured greewand yellow must be
connveted to the terminal which i marked with the le
ter £ or with the sefety earth symbol == oF coloured
eon or green-and-yellow
'Tho wire which is coloured biug must be connccted to
the terminal which is marked sith the letter N or colour
ed black,
'The wire which is coloured broun must be connected to
the terminal which ie marked with the letter Lor colour
ed red,