Table of Contents
Advertisement
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Include attachments: select this option to
receive attachments with e-mails.
Max. Emails retrieved: set the number of
e-mails you will retrieve from the server.
Email profile: configure the network settings
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Current profile: select a profile.
•
Profile settings: configure up to 5 e-mail profiles.
For each profile, the following options are required
to connect to the GPRS network:
Profile name: enter a name for the e-mail profile.
APN: enter the access point name used for the
GPRS network address.
Login ID: enter the user ID.
Password: enter the password.
DNS1: enter the primary address.
DNS2: enter the secondary address.
Block list: specify e-mail addresses from which
e-mails will not be accepted. You can also specify
e-mail subjects that you will not accept.
Push message
(Menu 5.5.4)
You can change the settings for receiving web push
messages from the wireless web server.
The following options are available:
•
Receive: set how your phone receives web push
messages.
61
Advertisement
Table of Contents
