Advertisement
Due to software updates, your experience of the software interface (including but not limited to software features, user interfaces, and interaction experiences) may differ from the interface presented in this guide. The software interface is subject to change.
CMF by Nothing Phone 1 charges at 33W. Able to reach 100% power in about 70 minutes with wired fast charge and a compatible fast charge adapter.
3-button navigation
Gesture navigation
Home screen
App drawer
Widgets
Pull down a second time to access the expanded Quick Settings. Swipe left and right to access more Quick Settings tiles. Press the edit (pencil) icon and drag the tiles to customise the layout.
Installing
Launch the "Play Store" and log into a Google account. Proceed to search for the app on the top search bar and tap the blue "Install" button. The installed app can be found in the app drawer.
Deleting
Open the app drawer, hold and drag the app that needs to be deleted. Drag it to the top right corner of the screen and release it under the area marked "Uninstall".
Note: If this action is performed on the home screen, the zone will be marked as "Remove", which only removes the icon from the home screen and will not uninstall the app.
The CMF by Nothing Phone 1 uses a 5000mAh battery, which should last a whole day of medium to heavy usage. If the ba ery is running low, enable Battery Saver mode by either tapping on the "Battery Saver" tile in Quick Settings, or pressing the Low Power notification that appears automatically when the device's ba ery falls below 20%.
To change the unlocking method, open the Settings app and find the "Lock screen & Security and privacy" option. Enter the "Device unlock"page to set the unlocking PIN, record additional fingerprints, or record facial data used for unlocking the device.
Google Assistant provides a virtual personal assistant experience through a natural language speech interface to perform a variety of tasks. It can be activated by short holding the power button or swiping up from the bottom right corner of the screen.
Learn more about things to say to Google Assistant from the Google Assistant app.
Q: How do I turn on my CMF by Nothing Phone 1
A: Press and hold the power button until the CMF by Nothing logo appears on the display.
Q: How do I transfer data from my existing phone to my Nothing CMF by Nothing Phone 1?
A: In the setup wizard, there will be an option to copy data from an existing device, either via a Google account backup or by connecting the two devices with a cable.
A: The language can be set on the first page of the setup wizard. It can also be changed in Settings > System > Languages and input.
A: Location services can be activated in Settings > Location. When this toggle is on, apps that require location services will request permission to access your location data when you open the app for the first time.
Q: How do I activate Find My Device on my Nothing CMF by Nothing Phone 1?
A: Find My Device will be automatically activated after you log into a Google account. However, the location can only be accessible if location services are toggled on. For more information, check out Settings > Google > Find My Device.
Q: How do I back up data on my Nothing CMF by Nothing Phone 1?
A: CMF by Nothing Phone 1 uses Google's default backup routine when it's connected to Wi-Fi and charging on standby for 2 hours. To backup immediately, navigate to Settings > Google > Backup and tap on the "Turn on" button.
Q: How do I change the wallpaper and accent colours on my Nothing CMF by Nothing Phone 1?
A: The wallpaper and accent colours can be changed by long pressing on an empty space in the homescreen, and selecting "Customisation" in the pop up menu. By default, CMF by Nothing Phone 1 will deploy Android's Dynamic Colour feature to extract colours from the wallpaper unless specified.
Q: How do I use screen recording on my Nothing CMF by Nothing Phone 1?
A: To set up the screen recording feature, swipe down from the top of the screen two times to access the expanded Quick Settings. Press the edit (pencil) icon and drag the Screen Recording tile up from the hidden tiles.
To begin recording, swipe down to open the Quick Settings and find the newly added Screen Recording tile. Tap it once and confirm to begin recording after the three-second countdown, shown on the right side of the notification bar. To finish recording, swipe down to open the notification centre and tap "Stop" to save the recording. The file can be accessible in Google Photos > Library > Movies.
Q: How do I add the Nothing X widget to my Nothing CMF by Nothing Phone 1?
A: Just like any other widget, the Nothing X widget can be accessible by long pressing on an empty space in the home screen and selecting "Widget" in the pop-up menu.
Q: How do I record on my Nothing CMF by Nothing Phone 1?
A: Launch the camera app and tap on the "Video" option on the mode selection bar.
Q: How do I set and use passcode on my Nothing CMF by Nothing Phone 1?
A: Go to Settings > Security and privacy > Device unlock to choose your preferred unlocking method. Note that you need to set a pa ern / PIN first in order to use fingerprint or Face Unlock.
Q: How do I do factory reset on my Nothing CMF by Nothing Phone 1?
A: To carry out a factory reset, go to Settings > System > Reset options > Erase all data (factory reset).
Q: How do I eject the SIM tray on my Nothing CMF by Nothing Phone 1?
A: Insert the provided SIM card remover tool into the hole next to the SIM tray, located on the bottom of the phone.
Q: How do I connect my CMF Buds Pro 2 to my Nothing CMF by Nothing Phone 1?
A: The Fast Pair feature launches on the CMF by Nothing Phone 1 when opening an unpaired CMF Buds Pro 2 case with the buds inside. Navigate through the Fast Pair setup to finish the pairing.
If Fast Pair does not appear, go to Settings > Connected Devices > Pair new device to search for Nothing CMF Buds Pro 2. For more details, please refer to the CMF Buds Pro 2 manual.
Q: How do I enable battery saver on my Nothing CMF by Nothing Phone 1?
A: When the CMF by Nothing Phone 1's battery falls below 20%, a low ba ery notification will appear to prompt you to turn on battery saver.
To toggle it manually, swipe down from the top of the screen two times to access the expanded Quick Settings. Press the edit (pencil) icon and drag the Battery
Saver tile up from the hidden tiles. Tap it to toggle it on and off from the Quick Setting.
Q: How do I force restart my Nothing CMF by Nothing Phone 1?
A: Hold the power button and volume up button simultaneously until the CMF by Nothing logo appears on the display.
Q: How do I enable Game Mode on my Nothing CMF by Nothing Phone 1?
A: Game mode is automatically activated when a listed app is launched. To edit the list of apps, go to Settings > System > Game Mode > App list. Apps that are listed as games on the Play Store will be added to this list by default.
Q: How do I know when a new software update is available?
A: Whenever a new software update becomes available, a notification will pop up reminding you to update to the latest version. However, you can also manually check for updates by going to Settings > About phone > Software info(the phone image). If there is a new update available, a red icon will appear next to the Nothing OS label.
A: Go to Settings > Display > Lock screen > Privacy to pick the notification preview option.
Q: How do I enable call waiting on Nothing CMF by Nothing Phone 1?
A: Open the Phone app and tap on the three-dots icon to the right of the search bar. Next, navigate to Settings > Caller accounts > Additional settings and toggle on Call waiting.
Q: How do I block / blacklist numbers on Nothing CMF by Nothing Phone 1?
A: Open the Phone app and tap on the three-dots icon to the right of the search bar. Next, navigate to Settings > Blocked numbers > Add a number, to block incoming calls and texts from the added number.
Q: How do I screen cast Nothing CMF by Nothing Phone 1 to my TV?
A: To set up the screen cast feature, swipe down from the top of the screen two times to access the expanded Quick Settings. Press the edit (pencil) icon and drag the Screen Cast tile up from the hidden tiles.
To begin mirroring, swipe down to open the Quick Settings and find the newly added ScreenCast tile. Tap it once and select the targeted device to cast to connect in the same local area network.
Q: How do I enable dark theme on Nothing CMF by Nothing Phone 1?
A: Dark theme is enabled by default. To change it, swipe down to access Quick Settings and find the "Dark Theme" tile and tap it to toggle it on / off.
Q: How do I change fonts on Nothing CMF by Nothing Phone 1?
A: The font in CMF by Nothing Phone 1 can not be changed. However, to change to font size, navigate to Settings > Display > Display size and text.
A: Open the Photos app and navigate to the Library on the bottom bar. Next, tap on "Bin" to see items deleted within the recent 60 days.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the CMF Phone 1 and is the answer not in the manual?
Questions and answers