Table of Contents
Advertisement
Download method: set whether the
phone downloads e-mail headers only or
e-mail headers and bodies both.
Keep in server: leave copies of e-mails
on the e-mail server after retrieving.
Download Email most recent first:
set the phone to download your most
recent e-mails first.
•
Block list: specify e-mail addresses or
subjects you want to reject.
•
Email accounts: set up an e-mail
account and select an account to be
used.
Current account: check or select an
account.
Account settings: configure e-mail
accounts using different e-mail servers.
Set the options for each account:
- Account name: enter a name for the
currently selected account.
- User name: enter a user name.
- Email address: enter your e-mail
address.
- SMTP server: enter the IP address or
host name of the outgoing e-mail
server.
- SMTP port: enter the SMTP port
number.
- Connect to POP3(IMAP4) server
first: connect to the POP3 or IMAP4
server before connecting to the SMTP
server to send e-mails.
- Protocol type: select the protocol for
the incoming e-mail server. The
remaining options depend on the
protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or
host name of the server that receives
your e-mail.
- POP3 port: enter the POP3 port
number.
- User ID: enter the POP3 user name.
- Password: enter the POP3 password.
- Use SMTP authentication: enable
SMTP authentication, which requires
the user to login before sending
e-mails.
- Same as POP3: select if you want the
SMTP server to have the same
parameters as the POP3 server.
69
Advertisement
Table of Contents
