Govee H5075 Manual

Table of Contents

Contents

1 At a Glance
2 What You Get
3 Specifications
4 Preparation Before Using
5 Downloading the Govee Home App
6 Connecting to Bluetooth
7 Using Your Device with Govee Home App
8 Troubleshooting
9 Customer Service
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Govee H5075 Manual

At a Glance

Unit Switch/Clear Button
Tap to switch temp unit to ºC/ºF on LCD screen. Press and hold for 3 seconds to clear MAX and MIN records for temp and humidity.

Bluetooth-connected
Display: Bluetooth is connected.
Not shown: Bluetooth isn't connected.

MAXIMIN
Maximum/Minimum temp and humidity readings in the past.

Comfort Level

DRY:	Humidity < 30%.
COMFORT:	20ºC temp 26ºC
COMFORT:	30% Humidity 60%
WET:	Humidity > 60%
Elsewise:	No icon.

What You Get

SKU	H5075001 H5075081	B5075001 B5075081
Smart Thermo- Hygrometer	1	2
AAA Battery	2	4
User Manual	1	1
Service Card	1	1

Specifications

Accuracy	Temp: ±0.3ºC /±0.54ºF, Humidity: ±3%
Operating Temp	0ºC-50ºC (32ºF - 122ºF)
Operating Humidity	0% - 99%
Bluetooth-enabled	50m/164ft
Distance	(NO obstacles)

Preparation Before Using

Place in the battery (Make sure the electrode direction is correct).

Downloading the Govee Home App

Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).

Connecting to Bluetooth

Turn on Bluetooth in your phone and get close to the Thermo-Hygrometer; (Notice: Android device users should turn on Location and iOS users should tap "Setting - Govee Home - Location Always" in your phone.)
Open Govee Home, tap "+" icon at the top right corner and select "H5075".
Follow instructions in app to complete connecting.
It shows Bluetooth connected icon on LCD screen once connection completed.
Please check the above steps and try again if connection failed.

Using Your Device with Govee Home App

Export data
Send historical data to your mailbox in CSV format.

Alert me
Push alert notifications once temp/humidity goes out of preset range.

Calibration
Calibration range for the temperature is 3ºC/5.4ºF while for the humidity is 20.0%.

Troubleshooting

Cannot connect to Bluetooth

Make sure Bluetooth in your phone has been turned on.
Connect to the thermo-hygrometer in the Govee Home app instead of Bluetooth list in your phone.
Keep the distance between your phone and the device less than 50m/ 1 64ft.
Keep your phone as close to the device as possible.
Make sure that Android device users turn on Location and iOS users select "Setting - Govee Home - Location - Always" in the phone.

Data in the app is not updated

Make sure the device has connected to the Govee Home app.

Make sure that Android device users turn on Location and iOS users select "Setting - Govee Home - Location Always" in the phone.

Cannot export data in the app

Please sign up and log in your account before exporting data.

The device should work in an environment with a temperature ranging from 0ºC to 50ºC and humidity from 0% to 99%.
Please take out batteries if you don't use the device for an extended period of time.
Prevent dropping the device from the high place.
Do not disassemble the device violently.
Do not immerse the device in the water.

Customer Service

Warranty: 1 2-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@Govee
@Govee
@GoveeofficiaI