SelePow VP06+ Manual

Parts and Functions

How to use

1. How to use sealed mason jars
   1. Correctly select the required caliber sealer (wide mouth/regular mouth);
   2. Put the food into the mason jar (do not let the food be completely filled, it is recommended that the food should not exceed the bottom thread of the mason jar mouth, in order to achieve a better vacuum sealing effect)
      
   3. Wipe the mouth of the bottle and the sealing cap clean, and there should be no dirt or liquid residue;
   4. Align the bottle cap with the mouth of the bottle (seethe picture below)
      
   5. Align the electric mason jar sealer with the mouth of the jar and press down until the sealer compresses the bottle cap (see the figure below)
      Schematic Diagram of Operation of Regular Mouth Mason Jar:
      
      Schematic Diagram of Operation of Wide Mouth Mason Jar:
      
   6. Press the "Switch" button to start the machine, until the air in the bottle is evacuated, then press the "Switch" button again (see the figure below)
      

Reminder:

1. Due to the vacuum pressure generated between the electric mason jar sealer and the mouth of the jar, it is necessary to press with greater force during the pressing down process to confirm that the sealer is tightly pressed against the bottle cap.
2. When the power display is lower than 20%, please charge it in time;
3. It is recommended to keep vacuumizing for more than 40s.

How to disassemble the regular port converter
To remove the "Regular mouth sealing converter" from the host, please rotate the "Regular mouth sealing converter" counterclockwise, after hearing a "click", () corresponds to (), and then pull up the "Regular mouth sealing converter" (See below).

Troubleshooting

Product Specification

After-sales Service

We will provide for 6-Months warranty. If you have any questions about our Mason jar vacuum sealer, please contact us immediately and we will provide you with satisfactory service within 24 hours. Contact email: selepow@outlook.com

Precautions for Safe Use

1. The working voltage of this product is DC3.7V, please fully charge it before use.
2. All accessories of this product are not allowed to be sterilized by microwave ovens, so as not to be damaged by thermal deformation.
3. Do not put the host into water or other liquids, and do not wash it under water or other liquids. It is strictly forbidden to wash all parts at high temperatures above 60ºC.
4. Do not use steel wool, abrasive cleaners or corrosive liquids (such as gasoline, acetone, etc.) to clean the product.
5. Do not put any parts of this product into the dishwasher.
6. This product is not waterproof.
7. Do not plug or unplug the charging cable with wet hands.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SelePow VP06+ Manual