Table of Contents
Advertisement
Advanced use
■ Vocal Enh. (Vocal Enhancer)
This effect controls a four-band equalizer to give the voice brightness and clarity.
It works on the basic components of a voice as well as the components that define its character, boosting or
reducing these components. This can be used to emphasize or modify the character of spoken lines in a stage
play, or when recording a vocal.
Parameter
NS
TONE
BRIGHT
■ Narration
This effect controls a de-esser and enhancer to give the voice greater clarity and intelligibility.
It will minimize the sibilants (*1) that are heard when vocalizing into a mic, making the voice more listenable.
When editing video, it's convenient to use this while recording a voice-over, narration, or reading.
(*1) Sibilants are the "s" sounds within words.
Parameter
NS
ATTACK
CLARITY
DEESSER
26
Range
Explanation
Cuts any low-volume noises that occur in the background of the vocal.
Raising this setting will cut progressively louder noises.
-90.0– -40 dB
* If you apply this too strongly, the beginning (attack) and end (decay) of the
voice may be cut off unnaturally, or the voice may be less intelligible.
Boosts the frequency range that is the basic component of the voice.
0–100
Raise this value to make the vocal more rich-sounding, or lower it to re-
duce unwanted resonance or loudness.
Increases the brightness.
0–100
The higher the value, the brighter the sound.
Range
Explanation
Cuts the low-volume noises that occur in the background of the voices.
Raising this setting will cut progressively louder noises.
-90.0– -40 dB
* If you apply this too strongly, the beginning (attack) and end (decay) of the
voice may be cut off unnaturally, or the voice may be less intelligible.
Emphasize the sense of attack for the voice.
0–100
Raising this setting will produce a stronger sense of attack.
Specifies the strength of the effect that clarifies the voice. Raising this
setting will apply the effect more strongly.
0–100
* If this effect is applied excessively to a voice that is already clear, the sound
may become unpleasant or distorted.
Cuts the sibilance.
0–100
Raising this setting will apply the effect more strongly.
Advertisement
Table of Contents
