Advertisement
1 x Cat Ear Headphone
2 Pairs x Speaker Tags
1 x USB Transmitter
1 x 3.5 mm Splitter Cable
1 x Type-C Charging Cable
1 x User Manual
Model GS510
Driver Diameter Ø50mm
Directivity (Mic) Omnidirectional
Frequency Response (Headphone) 20Hz ~ 20KHz
Headset Battery Capacity 1500mAh
Battery Working Time 8 Hours
Battery Charging Time 2 Hours
Communication Distance 10 Meters/33 Feet
Power On/Off
Long press the power button for 3 seconds to trun on/off the headset.
Audio Mode Switch
Short press the "mode " button once to switch the sound effect mode.
Green light: Gaming Mode
White light: Music Mode
Blue light: Live Mode
Light On/Off
Three-click the lighting touch key to turn on/off the headset light.
Light Color Switch
Press the lighting touch key for 2 seconds to switch the light color.
Charge
Connect Headphones to Devices via USB Transmitter (Compatible with PC, PS5, PS4, PS4 Pro, Laptop, MAC.)
★ Notes:
If connection fails, please try again after fully charged.
Connect Headphones to Devices via 3.5mm Audio Cable (Compatible with PS5/PS4/Xbox One/Xbox Series X/S Controller, Nintendo Switch)
Connect the headset to devices that with a 3.5mm jack via 3.5mm audio cable (included in package). For old Xbox One, a Microsoft adapter is required (not included).
★ Notes:
In wired mode, the headset light doesn't work, and all buttons are disable except volume+/- button.
Troubleshooting | Possible Reason | Exclusion Method |
Unable to boot | The battery power is insufficient | Charge the headset in time |
Unable to pairing | (2.4GHz Wireless Mode) When paired, the headphone is too far from the USB transmitter. | Please don't be far away from the device within 10 meters when connected and stay away from the interference sources like GPS/Wi-Fi. |
The battery power is insufficient | Charge the battery in time | |
The headset has noise | The battery power is insufficient | Charge the battery in time |
★ If the headset can't work properly, please try to reset the headset to solve the problem.
Steps: when the headset is on, insert a small pin into the reset hole (next to the 3.5m Aux interface) on the headset. Then push in for 3 seconds to reset the headset.
★ After connecting via the USB transmitter, the headset doesn't work?
★ After connecting via the USB transmitter, the mic doesn't work?
★ Other microphone problems or questions of the headset, please contact SOMIC support team.
SOMIC products are covered by a 12-month limited warranty from the date of its original purchase. If any problem occurs, please contact our support team. We will always be here to help you solve the problem. If you want to know more information, please visit Somic's official website www.itsomic.com.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the GS510 and is the answer not in the manual?
Questions and answers