AUXITO H1 - LED Light Bulbs Manual

How to Install the Device

There are 2 different light housings which have different wiring So the installation of the LED Bulbs is different. We have uploaded installation video to the product page for your reference. Watch the videos before installation please and choose the right installation steps according to your housing

Positive and Negative All In One Plug

There is only one plug in each headlight housing which contains both position and negative.

1. Remove the original bulb.
   
   • Remove the dust cover (if you have)
   • Disconnect the plug
   • Press down and release the buckle
   • Remove the original bulb.
2. Remove the collar from the bulb
   
3. Set collar in place and secure it with the small latch
   
4. Connect the wire adapter with the bulb (Red with big prong, black with small one), the wire adapters are included in the box.
   
5. Insert the bulb and make it tight
   
6. Connect the one male terminal to the stock plug.
   

Separate Positive and Negative Plugs

There are 2 plugs in each housing (Red wire plug is positive, black wire plug is negative)

1. Remove the original bulb.
   
   • Remove the dust cover (if you have)
   • Disconnect the plug
   • Press down and release the buckle.
   • Remove the original bulb.
2. Remove the collar from the bulb
   
3. Set collar in place and secure it with the small latch
   
4. Connect the stock plug to the bulb (positive connected to the big prong, negative connected to the small prong)
   
5. Insert the bulb and make it tight
   

Note: If the collar can't not be locked in place, extra adapters are needed. Contact us with your car model-year via email please.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AUXITO H1 - LED Light Bulbs Manual