Advertisement
WHAT'S INCLUDED
PRODUCT DIAGRAM
- Earhook
- Touch-control Area
- Microphone
- Earphone Indicator
- Type-C Charging Port
- Charging Case Indicator
OPERATION
| Function | Operation |
| Power On | Tap and hold for 3s |
| Power Off | Tap and hold for 5s |
| Play/Pause | Tap twice |
| Activate/Deactivate Voice Assistant | Tap three times |
| Answer/Hang up Call | Tap twice |
| Reject Call | Tap and hold for 2s when call comes in |
| Volume Up | Tap right earphone once |
| Volume Down | Tap left earphone once |
| Previous Track | Tap and hold left earphone for 1.5s |
| Next Track | Tap and hold right earphone for 1.5s |
| Reset | Tap and hold left and right earphones for 8s |
INDICATORS
| Status | Indicator | Display |
| Power On | Blue | Flashes once |
| Power Off | Red | Flashes once |
| Charging | Solid | |
| Low Battery | Flashes once every 5s | |
| Fully Charged | Off | |
| Pairing | Red & Blue | Flashing alternately |
| Reset | Flashing 3 times | |
| Charging Case Power | Red (30%) | On for 30s |
| Orange (30%-70%) | ||
| Green (70%) |
SPECIFICATION
| Product Material | ABS + PC + Silicone Rubber |
| Blutooth Version | V5.4 |
| Working Range | ≤ 18m |
| Battery Capacity | 55mAh*2+400mAh |
| Rated Input | 5V  500mA |
| Charging Time | < 1.5H |
| Play Time | 8H (50%VoIume) |
| Protection Grade | IPX7 (Earphones Only) |
HOW TO CONNECT
- Take out the earphones from charging case into pairing mode, the earphones indicator flashes red and blue alternately.
![]()
*When powered on, RY-AC01 will automatically connect with the last paired device.
*The pairing state will exit if pairing lasts longer than 5mins or pairing fails.
- Select "RY-AC01" from your Bluetooth list and connect, the earphones' indicator turn off when connected
![]()
HOW TO WEAR
RESET
If the earphones automatically connected back to the previous device when you want to connect other device
- Turn off earphones.
Put the earphones back to the charging case
or
Tap and hold any of the earphone for 5s
- Tap and hold both earphones for 8s and into pairing mode.
![]()
HOW TO CHARGE
Charge the Unit
Put the earphones in the charging case.
Low battery: Red light fashes every 5s
Charging: Red light solid
Fully charged: Light off
Charge Case
Charge the case by Type-C cable.
1%-30%: Red light fashes
31%-70%: Orange light fashes
71%-99%: Green light fashes
Fully charged: Green light solid
WARRANTY&SERVICE
This product is covered with Rythflo product and labor warranty for 12 months from the date of its original purchase.
Any concerns please email us as soon as possible, Rythflo will help you within 24 hours.
support@rythflo.com
MANUFACTURER
Shenzhen Hanke Technology Co.,Ltd
Room 601, No. 1 Lane, Wuhe Community, Bantian Street, Longgang
District, Shenzhen, Guangdong, China, 518000
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the RY-AC01 and is the answer not in the manual?
Questions and answers