Infrared And Bluetooth Connection - QTek s100 User Manual

4.3 Infrared and Bluetooth Connection

Infrared
You can use infrared (IR) to send and receive information and files between mobile devices.
If an IR port is installed on your PC, you can send and receive information and files between
your Pocket PC Phone and PC. On your Pocket PC Phone, tap the Start menu > Settings
> the Connections tab > Beam.
By default your device detects incoming infrared (IR) and Bluetooth beams and prompts
you to accept them. If you do not want your Pocket PC Phone to detect or receive beams,
clear the Receive all incoming beams check box.
NOTE: If someone attempts to send you an IR beam from an older device, you may not
be prompted to accept it. In this case, before the beam is sent from the other device, tap
Receive an infrared beam at the bottom of the Beam screen.
Bluetooth
1. Make sure that your Pocket PC Phone is configured to receive incoming beams.
2. Make sure that your Pocket PC Phone is turned on, discoverable, and within 10 meters
3. When prompted to receive an incoming beam, tap Yes to accept the beam.
For more information about Bluetooth and its settings, please see Chapter 6.
(about 30 feet) of the other device beaming the information.
Pocket PC Phone User Manual 73