Advertisement
KNOW YOUR SPEAKER
| 1 | Micro SD card port |
| 2 | Charging port |
| 3 | Microphone |
| 4 | 3.5mm port |
| 5 | LED indicator |
| 6 | Button  |
| 7 | Button  |
| 8 | Button  |
| 9 | Power on and light change  |
BUTTON OPERATION
Power on: Press and hold 
button 2 sec when the device is off ( the red and blue light will flash, you will hear voice promote "power on and pairing," at the same time), enter to the pairing mode freely.
Play/pause: Press 
button to pause when it is playing, then press again to play.
Volume up: Click 
button.
Volume down: Click 
button.
Previous track: Long press button.
Next track: Long press button.
Answer incoming call: Press button 2 sec.
Hang up the phone: Click button.
Reject incoming call: Press button 2 sec.
Light ON / OFF: Double click button.
Power off: Press and hold button 2 seconds when headset is standby or working mode. ( voice prompt "power off".)
Charging: Connect the charger to the USB type-C charging port, the indicator light will turn red, the light will turn off after fully charged.
Music / game mode switch: Double click button.
MICRO SD CARD MODE
It would into TF mode once insert TF card, then identify music automatically.
WIRED AUDIO
Connect aux cable to device. The headset power off and enter aux mode.
CONNECTION BT
- Press and hold the button
![]()
for 2 seconds until the headphone powers on and enter pairing mode automatically after 5s. LED indicator flashes blue and red alternately. ( Headphones power off after 5 min if no bluetooth connected). - Activate bluetooth on your device and set it to search for new devices.
- Select "HPB-401-LED"
"If necessary, enter four zeros (0000) for pass code and accept connection. Once successfully paired, the headphones LED indicator flashes blue.
Wired connection: Use the audio cable to connect.
for 2 seconds until the headphone powers on and enter pairing mode automatically after 5s. LED indicator flashes blue and red alternately. ( Headphones power off after 5 min if no bluetooth connected).CHARGE
Please plug USB type-C into headphone charging port and connect the other side with USB wall charging, and turns blue when fully charged.
DATA SHEET
| Connector: | USB Type-C |
| Sensitivity: | 119±3dB |
| Impedance: | 32Ω |
| Frequency range: | 20Hz - 20KHz |
| Lighting: | Rainbow |
| Connection: | BT 5.3,TF,3.5mm |
| Horn diameter: | 40mm |
| Range: | 10m |
| Weight: | 220g |
| THD: | < 1% |
| Battery: | (3.7V 500mAh) |
| Microphone | |
| Sensitivity: | -38dB ± 3dB |
| Frequency range: | 30Hz - 16kHz |
Call us
+52(33)30446666
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download VORAGO STG 401 LED - Wireless Headphones Quick Guide
Advertisement
Need help?
Do you have a question about the STG 401 LED and is the answer not in the manual?
Questions and answers