VEOpulse B-PRO 2 - Speakerphone Manual

PRESENTATION OF THE B-PRO

SETTING UP YOUR KIT

Insert the metal clip into the back of the kit. Then put the clamp on the lens hood of your car.

B-PRO CONTROLS

CHARGING THE B-PRO

CHARGING THE KIT IN YOUR CAR

Connect the handsfree kit to the supplied cable and insert the cigarette lighter adapter into the socket.

CHARGING ON YOUR COMPUTER

Connect the USB cable to one of your computer's USB ports.

FIRST USE

TURN ON THE KIT

Slide the ON / OFF button to turn the kit on / off.

CHOICE OF LANGUAGE

Always perform before the kit is not connected to your phone. Press the voice button for at least 5 seconds to select the language, then release and press again until the language is selected. Once selected wait 3 seconds before turning off the kit.

FIRST CONNECTION

To connect your phone, please follow the steps below:

1. Turn on the kit
2. The kit flashes red and blue, the voice will say "Power on, Pairing" when the kit lights up.
3. Activate Bluetooth on your phone and search for the S-62 Bluetooth device. If your phone asks for a code, enter: 0000.
4. The kit will announce then "connected" and the light will blink blue.

NOTE: Once the first connection is made, your phone will be stored in the kit and the connection will be done automatically.

CONNECT YOUR B-PRO WITH A 2ND PHONE

1. Turn on the B-PRO and connect it to the first phone
2. Press the Volume + and Volume – buttons simultaneously for 2 seconds, the B-PRO will then disconnect on the first phone.
   
3. Activate Bluetooth on your second phone and select the S-62 device. (If you are prompted for a code, enter 0000).
   4Select the S-62 on the first phone to reconnect it.

USING THE KIT

MAKING A CALL

If you start the call on your phone the conversation will automatically switch to the B-PRO.
Use voice commands to make a call (SIRI, OK Google, if compatible): Press the voice commands button, wait a few seconds for the voice commands to launch on your phone then say "call AAA" (detailed help on veopulse.com/voc)
Redial the last number: Double tap the answer / end button.
Adjust Speaker volume: Press the + and - buttons for 2 secs.

ANSWER AND HANG UP CALL

1. When you receive a call the kit will read the correspondent's number. You can hang up by pressing the phone button (or reject by pressing the phone button at any time) or after the number is read you can say "YES" in order to pick up (or "NO "To refuse the call).
2. During the conversation you can change the volume by pressing and holding down the + and -.
3. When the call ends, you can hang up by pressing the phone button (or wait until the caller hangs up).

AUTOMATIC SHUTDOWN

If the kit does not receive a Bluetooth signal for 3 minutes it will turn off automatically (when you leave your vehicle for example).

AUTOMATIC POWER ON

When the kit turns off automatically (the button was left ON), if you vibrate the kit a little (eg opening / closing the door of your car), the kit will automatically turn on.

PLAYING MUSIC OR GPS

When your phone is connected to the kit, all sounds are played back on the kit. If you play music or use your phone's GPS, all of the sounds will be output by the kit;

LIGHT INDICATORS

When the battery of the B-PRO is low it flashes red rapidly.
When you load the kit, the B-PRO LED will remain lit in red. Once charged (2-3 hours) the indicator goes off.

Technical specifications

Frequently asked Questions

I hear sizzling

Bluetooth is a sensitive signal. Make sure your phone is close to the kit (less than 10m) and that there are no obstacles between them (walls...)

I do not hear anything

Try increasing the volume on the kit or on your phone. Make sure the kit is connected to the phone.

I cannot use my phone's voice commands

Consult the manual of your phone and our website veopulse.com

How to reset the kit

Press the + and - buttons simultaneously for 5 secs. This will delete all stored phones. This can solve connection problems.

I have another question

Please visit our veopulse website or contact us by e-mail at contact@veopulse.com

PRECAUTIONS

• Store your kit with the button off and well protected.
• Avoid exposing the kit to temperatures above 45°C and below -10°C
• Do not expose the kit to liquids

To begin, please register your kit for warranty by going to veopulse.com/reg (it takes 2 minutes, it is not necessary if you bought directly on our site).
If you have any questions or problems with the hands-free kit, do not hesitate to contact us via contact@veopulse.com (answer within 24 hours)