Advertisement
With Plug & Play feature, this device does not need a specific driver under Windows 2000, ME, XP, Vista.
Your new device may have a double connector allowing it to work with a PS/2 or USB port. It is advisable when connecting the product to a PS/2 port that the computer is turned off. The pins on the PS/2 connector can be easily damaged so ensure not to force into the computers port The PS/2 plug and socket must align correctly before putting pressure on the PS/2 plug. The device uses standard Windows setting so it should immediately work after the restart.
After I install the wireless device, why it is not working?
This is due to the missing of wireless connection. The device is not connecting with the PC, and please setup the connection between the device and the receiver again. Please follow the step from "Wireless USB Installation"
The wireless mouse works in the first few days, but it doesn't work properly now or stops working. Why?
When the battery power is low, the mouse may not work properly. Please immediately change a new battery, and it should work again.
This is normally due to the surface on which the mouse is being used. To get the best performance from your mouse we recommend that you use a high quality mouse mat; however, in most cases the mouse will operate perfectly on most surfaces except glass or highly reflective surfaces. If in doubt try the mouse on another surface.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the PERIMICE-515 and is the answer not in the manual?
Questions and answers