Advertisement
Bluetooth Version: BT5.2+EDR
Earbud Charging time: 1.5 hours
Charging case Charging time: 2.5 hours
Earbud Battery: 3.7V/30mAh
Charging Case Battery: 3.7V/300mAh
Wearing:
Choose the silicone eartips that are most suitable for your ears.
ON/OFF: When the charging case battery level is sufficient, open the charging case.
The earbuds will automatically turn on. put them into the case and. P close the cover- the earbuds will automatically turn off.
Note: You can also turn on or turn off the earbuds manually - Press and hold the MFB on UR for 2 seconds to turn on the earbuds. Press and hold the MFB on L/R for 5 seconds to turn off the earbuds when they are not connected with devices.
Pairing: When the charging case battery level is sufficient, open the charging case- the earbuds will automatically turn on then - enter Bluetooth pairing mode.
At this time, the indicator of the main earbud will flash red and white alternately and the indicator of the secondary earbud will flash white every 3 seconds.
Please turn on the Bluetooth function on your device, search "Majority Tru 1" and click to connect.
Charging: Before using, please make sure the charging case and the earbuds are fully charged.
Play/Pause:
One-tap the MFB on UR.
Previous Song:
Double-tap on the MFB on L.
Note: In mono mode, double-tap on the MFB on L will trigger next song function.
Next Song:
Double-tap on the MFB on R.
Volume Down:
Triple-Tap the MFB on L to decrease the volume.
Note: In mono mode, volume adjustment is unavailable.
Volume up:
Triple-Tapthe MFB on R to increase the volume.
Note: In mono mode, volume adjustment is unavailable.
Answer/End a call:
One-tap the MFB on L/R.
Reject a call:
Press and hold the MFB on L/R for 2 seconds when calling.
Volume Down/Up
Activate Voice Assistant:
Press and hold the MFB on L/R for 2 seconds.
Note: In mono mode, holding the MFB on L/R for 2 seconds will turn on the voice assistant.
Reset:
LED Indicator
Charging the case: Red LED flashes slowly to indicate the case is receiving charge, and turns Off when fully charged.
Charging the earbuds: Green LED on earbud remains on to indicate receiving charge, and turns Off when earbuds are full charged.
Charging case when low battery: Blinking green light flashes.
| Check both earbuds and charging case are fully charged. |
| Make sure it is connected with your device correctly. If yes, triple click the right earbuds to increase the volume. |
| Clean the charging contacts of earbuds and charging case. |
| Put both earbuds back in charging case and close the charging case, open the case after 10 seconds. |
Power Supply | DC5V (USB-C) |
Driver | 32 ohm/8mw |
Driver size | ![]() |
Frequency response | 180-20KHZ |
Bluetooth | V5.2 |
Earbuds battery | 30mAh (Each earbud) |
Charging case battery | 3.7V 300mAh |
Dimension (WxHxD) | 58x 48 x 26 mm |
Net Weight | 40g |
If you require further assistance with your new Majority Tru 1 please contact our support team on the Majority website:
www.majority.co.uk/support
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Please read all instructions carefully before use and keep for future reference.
Risk of electric shock. Do not open
Read all instructions carefully before use and keep for future reference
When servicing, use only identical replacement parts
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Tru 1 and is the answer not in the manual?
Questions and answers