MAJORITY MP3 Go - MP3 Player Manual

Box Contents

What's in the Box?

1. Majority MP3 GO Player 16GB
2. Earphones
3. USB Type-C charging Cable
4. Instructions Guide

Controls & Functions

MP3 Go Player

1. Play/Pause/Power ON/OFF/OK/Enter Button
2. 1.54'' IPS screen
3. Menu Button
4. Return/ Back Button
5. Previous / Hold to fast backward
6. Next / Hold to fast forward
7. Volume +
8. Volume -
9. Micro SD Card slot
10. Earphone Jack
11. Hold Lock/Unlock
12. Type-C Charging Port
13. Reset

Basic Operation

Please note that the instructions within this user manual will refer to the button number on the unit e.g. (Ref. 'Number'), as per the diagrams above.

Power ON/OFF

Press and hold the 'Power' button (Ref.1) for 2-3 seconds to switch ON/OFF.

Standby Mode

When the screen goes black, press the 'Power' button (Ref.1) to take the Majority MP3 GO Player out of Standby Mode.

Hold button- Lock/Unlock

Slide the 'Hold' button (Ref.11) to the left side to hold/lock the Majority MP3 GO or slide to the right to Unlock.

Please note: While the Majority MP3 GO is locked, the buttons do not function. Ensure that the device is unlocked to resume operations.

Navigate through the Menu/Sub-Menu options

Use the 'Previous' and 'Next' buttons (Ref.5 & 6) to navigate and highlight your selection within each Menu or Sub-Menu, and then press the 'OK' button (Ref.1) to access/enter or confirm as described in this manual.

Charging

Prepare the Majority MP3 GO for charging. To begin, switch the device off before charging.
Using the USB Type-C cable provided in the box, insert the micro USB end into the USB charging port of the Majority MP3 GO (Ref.12), and the other end into a USB port of a PC or laptop. Alternatively, connect the Majority MP3 GO to a wall socket using the USB Type-C cable with a USB plug (the plug is not included in the box).
When connecting the Majority MP3 GO player with a PC or laptop using the USB Type-C cable, you will have two options displayed on the MP3 GO player screen to choose from: 'Charge & Transfer'- Select this option to charge and transfer audio files on the MP3 player.

'Charge & Play'- Select this option to charge and play at the same time. The battery indicator of the Majority MP3 GO will show when the device is running low and needs to be charged. It takes 3 hours for the Majority MP3 Go to be fully charged when the device is not in use.

Music

File Transfer/Adding Music

Switch OFF the Majority MP3 GO using the 'Power' button (Ref.1) to prepare for transfer. Connect the Majority MP3 GO to your computer using the USB Type-C cable. (included in the box). Once connected with a PC or laptop, select 'Charge & Transfer' on the Majority MP3 Go, and then press the 'POWER' button (Ref.1) to confirm.

The Majority MP3 GO will be recognised on your computer the same way a USB stick is. Drag and drop audio files in supported formats from your PC into the Majority MP3 GO. Wait until files are completely transferred before removing the Majority MP3 GO.

Once transferred ensure the MP3 Go player is firstly and safely ejected from the File Explorer options of your computer before disconnecting the USB Type-C cable.

Compatible operating systems:
Windows 7/8/8.1/10/XP/11/Vista/2001/Mac OS.

Supported audio formats:
MP3/WMA/OGG/APE/FLAC/WAV/AA/AAX.

Play music

Press the 'MENU' button (Ref.3) to enter the 'Main Menu'.
Using the 'Previous'/'Next' buttons (Ref.5 and 6), search and select 'MUSIC'.
Press the 'ENTER' button (Ref.1) to confirm.
Select for example, 'All songs' and start playing your music.

Skip track

Press the 'Previous'/'Next' buttons (Ref.5 & 6) to skip to the previous/next track.

Fast forward/Rewind track

To rewind, press and hold the 'Previous' button (Ref.5). Release to resume.
To fast forward, press and hold the 'Next' button (Ref.6). Release to resume.

Create a Playlist

To create a playlist, select 'Music' from the Main Menu, and then create a playlist using one of these two methods:

Method 1:
While in 'MUSIC', scroll through the options using the 'Previous'/'Next' buttons (Ref.5 & 6) and select 'Create Playlist'. Press the 'OK' button (Ref.1) to enter. Scroll through the list of the audio files and pick one. Once highlighted, press the 'OK' button (Ref.1) to start playing. Press the 'Main Menu' button (Ref.3) and select 'Add to Playlist' from the menu options. Select the Playlist where you would like to add the audio file on. The device will then ask for confirmation. To add the song, select 'Yes'. To cancel, select 'No', or press the 'back' button (Ref.4) to choose a different playlist. Repeat the above steps to add more songs.

Method 2:
While playing a song/audio file that you would like to add on a Playlist, press the 'Menu' button (Ref.3). Scroll through the options using the arrow buttons and select 'Add to playlist'. Press the 'OK' button (Ref.1) to confirm. Select the playlist where you would like to add the audio file and confirm your selection with the 'OK' button (Ref.1).

MUSIC Menu options

When powering on the Majority MP3 GO, press the 'Menu' button (Ref.3), to enter the MUSIC Menu. Press the 'OK' button (Ref.1) to enter.
The following options are available within the Music Menu when a song isn't playing:
Now Playing – select to resume playing.
All songs- select to view a list of all songs.
Artists- select to view music by artist.
Albums- select to view music by album.
Genres- select to view music by genre.
Playlists- select to play a playlist.
Create playlist- select to begin creating a playlist.

Please note: You can create in total 3 Playlists of up to 100 songs each.

While playing a song, press the 'MENU' button (Ref.3), to enter the 'Music Menu'. Use the 'Previous' and 'Next' buttons (Ref.5 & 6), access any of the below options. Press the 'OK' button to confirm (Ref.1) your selection.

Repeat

'Repeat 1' to repeat the song currently playing.
'Repeat all' to repeat the playlist currently playing.
'Repeat OFF' to cancel the repeat function already set.

Repeat Settings

Use this feature to create a repeat of a specific part of the song that you would like to play repeatedly by setting the 'Repeat Mode', the 'Reply Interval and the 'Reply times'.

Shuffle

Play audio files in random order. Select Shuffle as 'ON' or 'OFF', and then press the 'OK' button (Ref.1) to confirm.
Sound Settings- select the Variable Speed, Playback/Volume limit or the Equaliser.
Add to playlist- add a song to a playlist.
Remove from playlist- remove the song currently playing from the playlist.
Delete- delete the song playing from the MP3 GO player.
Bookmarks- Add a bookmark to start playing an audio file from a specific point. Once selected, the bookmarked audio will be available under 'Bookmarks'. You can set up to 10 Bookmarks.

Bluetooth

The Majority MP3 GO can be paired via Bluetooth with earbuds or external speaker using the following steps:

1. Select 'Bluetooth' from the Main Menu, and then press the 'OK' button to enter(Ref.1).
2. Activate the Bluetooth connection on the Majority MP3 GO by entering the 'Bluetooth Switch Control' and select 'Bluetooth Open'. Press the 'OK' button(Ref.1) to confirm, and then press the 'Back' button (Ref.4) to return to the Bluetooth Menu.
3. Activate Bluetooth on your device, making sure your device is visible and ready to pair. Search for devices on the Majority MP3 Go. While searching, a flashing icon (indicating Bluetooth) will be visible on the screen next to the battery icon, representing that the player is searching for available devices around to pair with.
4. A list of devices found will then be displayed on the Majority MP3 GO. Select the one you would like to pair with, and then press the 'OK' button(Ref.1) to confirm, match and connect. Wait a few seconds for the connection to be established. Once successfully paired, the screen will read 'Connected' and you can now start playing music from the Majority MP3 GO via your Bluetooth audio output device.

If the connection fails, please try the same steps again as described at points 2, 3, 4.
To disconnect the Majority MP3 GO, from a device already paired with remove from yours from the 'List of devices'.
To switch off Bluetooth on the Majority MP3 GO, access the 'Bluetooth Switch Control' and select 'Bluetooth OFF'.

Voice Recordings

Within the Main Menu, select 'Recordings' and then press the 'OK' button (Ref.1) to enter.

Create a voice recording.

• Select 'Start voice recording' and then press the 'OK' button(Ref.1) to start recording.
• The device will now begin recording using the built-in microphone.
• Once you finished recording, press the 'OK' button to Pause/Stop(Ref.1).
• Press the 'Back' button(Ref.4) and then select 'Yes' or 'No' to save or delete the recording.

Record format - Select to choose the format of your recordings: MP3 or WAV recording file.
Record Settings- Select to choose and adjust the recorder Bitrate settings. Bitrate settings enables you to change the recording bitrate to 512, 768, 1024, and 1536kbps (Kilobits per second).
Recordings library- Select to view the list of your recordings.

Other Features

FOLDER VIEW

View all files
Select 'Folder view' from the Main Menu to view a list of all files/folders available on the Majority MP3 Go. Connect the Majority MP3 GO with a computer/laptop using USB Type-C cable included in the box to access 'Folder View' from your computer. Once connected, find the 'Majority MP3 GO'.

WALLPAPER

Select 'Wallpaper' from the Main Menu, and then press the 'OK' button (Ref.1) to change the wallpaper. Each time you press the 'OK' button (Ref.1), the Majority MP3 Go will generate a new wallpaper. There are 6 wallpapers to choose from.

STOPWATCH

Select 'Stopwatch' from the Main Menu, and then press the 'OK' button to enter (Ref.1). Start a timer, and then press the 'OK' button (Ref.1) to Pause or Stop. Press the 'Menu' button (Ref.3) to reset the data.

CALENDAR

Select 'Calendar' from the Main Menu, and then press the 'OK' button (Ref.1) to view the calendar date.

Settings Menu

SETTINGS
To view and change the main settings on the MP3 Go player, select 'Settings' from the Main Menu. Use the 'Previous' and 'Next' buttons (Ref.5 & 6) to select your option, press the 'OK' button (Ref.1) to enter each sub-menu.
Language - Select to change the device menu language. Choose your preferred language from a list of 30 available.
Display Settings - Select to change the display screen 'Brightness', set a 'Backlight timer' or a 'Screensaver'.
Sleep Timer - Select to activate a 'Sleep Timer' with automatic turn Off settings.
Power Off Timer - Select to adjust the Auto Turn Off settings when there is no activity on the Majority MP3 GO.
Date and Time - Select and adjust the date and time settings.
Information - Select to view information related to the Firmware version and the remaining Disk space available of the Majority MP3 GO.
Factory Settings - Select to restore the Majority MP3 GO player to factory settings.
Format Device - Select to format the device and delete all data and files.

Please note: If you have an SD card inserted, this must be removed before using a 'Format Device', otherwise all data from the SD card will be deleted.

Troubleshooting

Support

If you require further assistance with your Majority MP3 GO, please contact our tech support team on the Majority website: www.majority.co.uk/support

Product Specification

Safety Information

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do no clean the apparatus near or with water.
6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use accessories specified by the manufacturer.
11. Unplug this apparatus during light storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel.
13. No naked flame sources, such as a lit candle should be placed on the apparatus.
14. Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping, splashing or objects filled with water.
The main plug is used to disconnect the device. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat.

Please read all instructions carefully before use and keep for future reference.

Risk of electric shock.
Do not open.

Read all instructions carefully before use and keep for future reference.

When servicing, use only identical replacement parts.

Register your product online for a FREE 3 year extended warranty at: www.majority.co.uk

www.majority.co.uk

Documents / Resources

References

• Support – Majority
• Majority – Home Audio | DAB & Internet Radios | Soundbars

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download MAJORITY MP3 Go - MP3 Player Manual