Klein Tools AEPJS2 - Bluetooth Jobsite Speaker Manual

CONTENTS

• AEPJS2 Bluetooth' Speaker
• 24' (610mm) USB Type C
• 24' (610mm) 1/8" (3.5mm) Auxiliary Cable
• Instruction Sheet

GENERAL SPECIFICATIONS

Dimensions: 4.22" x 4.11" x 1.59" (107.2 x 104.4 x 40.4 mm)
Weight: 9.5 oz. (269.3 g)
Wireless Compatibility: Devices with Bluetooth® Version 4.2
Wireless Connection Range: 32.8 ft. (10 m) in open space
Support Profiles: A2DP, AVRCP, GAVDP, HFP
Output Power: 5W
Battery Type: Internal, Li-lon, 3.65V /2150mAh
Battery Life: Approx. 10 to 13 hours at 70% volume
Charging Requirements: Maximum 5V DC, Minimum 0.45A
Certifications: CE, FCC, IC, & BC, NOM
Operating/Charging Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: -22° to 140°F (-30° to 60°C)
Relative Humidity: <85% non-condensing
Drop Protection: 9.8' (3 m)
Ingress Protection (IP) Rating: 1P54

Specifications subject to change.

FEATURE DETAILS

FRONT

BACK

1. Power button
2. "-" Volume down/skip backward button
3. Play/Pause/Talk button
4. "+" Volume up/skip forward button
5. Auxiliary "Aux In" jack
6. USB charging port
7. Water-resistant cover
8. LED indicator
9. Microphone
10. Strap
11. Nail hole]
12. Magnet
13. Snap L-hook
14. L-hook slot

MAINTENANCE

CLEANING: Be sure speaker is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.

STORAGE: If the speaker is to be left unused for an extended period of time, charge before storing, and recharge periodically during storage, to maintain battery's charging capacity,

OPERATING INSTRUCTIONS

CHARGING BATTERY

Fully charge speaker before use. First-time charge should be at least 4 hours.

Connect the USB Type C cable connection to USB charging port ; plug the other end of cable to computer or USB AC adapter or other USB power supply (not included). USB adapter/power supply should not exceed the specified charging voltage and current (Max. 5V DC, min. 0.45A). Normal charging time is 4 to 6 hours.

LED Indicator Color

ON/OFF: Press & hold power button for 3 seconds, a tone will sound. Unit will automatically power off after 10 minutes of inactivity.

NOTE: Turn unit off when not in use to prolong battery life.

PAIRING: Wireless connection activates automatically and is ready to pair when unit is turned on. On your Bluetooth® wireless compatible device, enable Bluetooth® and search/scan for devices that can be paired. Select "AEPJS2" when it appears (refer to the user manual of your device). If necessary, enter "0000" as pairing passcode. A tone sounds after a successful pairing.

NOTE: Unit automatically attempts to connect the last paired wireless device device but is ready to pair with any compatible device if the last paired device is not detected within 5 seconds of powering on.

DISCONNECT PAIRING:

1. Turn unit off; -or-
2. Double-press Power Button (tone sounds); -or-
3. Plug a cable into Aux jack ; -or-
4. turn off Bluetooth® wireless connection in paired device.

RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES: Double-press Power Button (tone sounds). Repeat Pairing procedure with
different devices.

PLAYING AUDIO: Use your device to control the speaker or use the built-in control buttons on the speaker.

• Press Play/Pause/Talk button to play or pause audio on your device.
• Short-press the "-" or "+" button to adjust the speaker volume. A tone will sound when maximum volume is reached. Volume may also be controlled from your audio device.
• Long press the"-" or "+" button to skip backward or forward (respectively) during a song.

AUXILIARY AUDIO-IN: Connect one end of the auxiliary cable to the AUX jack of the speaker; plug the other end of cable to line-out or headphone jack of your device.

SPEAKERPHONE OPERATION:

• When an incoming call occurs, playing music is muted & ring tone sounds. Short-press Play/Pause/Talk button to answer the call, or long-press to ignore.
• To disconnect the call, short press the Play/Pause/Talk button to hang up.
• To redial last call, long press Play/Pause/Talk button when speaker is playing music.

LOW BATTERY INDICATION: A continuous double-beep tone will sound when battery level drops to approximately 10%. Speaker will automatically power off when the battery level is below 3%. Recharge speaker as soon as possible.

POSITIONING SPEAKER:

• Make sure that front of speaker is not obstructed.
• Stand speaker upright on a flat, level, stable surface.
• Attach speaker to a metal surface via the magnet on the back of the unit . DO NOT mount to electrical equipment.
• Hang from a nail or like item by opening the strap and placing the nail hole over the head of the nail.
• Strap to any backpack, belt, 1/2" conduit or smaller round surface by looping the strap around and snapping the L-hook into the slot.

SAFETY INSTRUCTIONS

Read, understand, and follow these instructions to ensure safe operation.
Failure to observe these warnings can result in risk of fire or electric shock.

• Keep these instructions for future reference.
• No user-serviceable parts inside. Do not open enclosure or attempt to repair this speaker,
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical equipment.
• Do not expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes in environmental temperature.
• Never immerse in water or other liquids. Avoid spilling liquids or falling foreign objects into openings or vents on the speaker enclosure.
• Water-resistant cover must be properly sealed to achieve specified water & foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in tisk of fire or electric shock.
• Do not open water-resistant cover if wet or in a wet environment. Dry the speaker thoroughly and the seal around water-resistant cover completely before opening water-resistant cover.
• When speaker is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat.
• Use safety-rated power supply or wall adapter. Never use power supply or wall adapter that exceeds the specified charging voltage and current.
• Route the power supply cable so that it will not to be stepped on or pinched by other objects.

SYMBOLS ON PRODUCT

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Klein Tools AEPJS2 - Bluetooth Jobsite Speaker Manual