Do you have a question about the atlanta Contempo All In One Unit and is the answer not in the manual?
Questions and answers
Summary of Contents for bemodern atlanta Contempo All In One Unit
Page 1
Installation Instruction Contempo All In One Unit DECEMBER 2024 200891...
Page 2
Bathroom Furniture Assembly Instructions Product Identification All units can be easily identified from the labels on the packaging. These labels include a description and product batch numbers. In the unlikely event of any missing items, these numbers should be quoted when contacting your supplier. Please inspect all products carefully before installation.
Installation Cabinet connecting bolts are suppled to fasten the two units together. To do this, clamp the units together making sure they are level. Using a 5mm drill, drill through the connecting cabinet sides then use the provided connecting bolts to secure units together. NOTE: Make sure the units are correct way round before drilling.
Page 5
Installation A silicone sealing edging strip is supplied to seal the RAW cutout for the basin. Before installing the basin peel the backing off the double sided tape on the silicone strip and secure around the cut-out making sure the raw edge is sealed. (The Silicone sealing edging strip may need trimming to size using scissors) To fit the basin place a bead of silicone along the top edge of the cabinet and site the basin on top.
Door Adjustments Door Front adjustment Set the distance between the back face of the door and the edge of the unit side panel. Tip: Leave an approx. 2mm gap to help avoid binding. To fix the hinge arm to the hinge plate, tighten screws (1) securely.
Need help?
Do you have a question about the atlanta Contempo All In One Unit and is the answer not in the manual?
Questions and answers