Table of Contents
Advertisement
Quick Links
K21 GANTRY LIGHT
Rapid Deployment Lightweight Mobile Lighting System
Operator's Manual
This manual covers the K21 with the following product code:
K21-110VDC | K21-110VS10 | K21-220VDC | K21-220VS10
The information contained in this manual is based on products manufactured up to the time of publication.
Ritelite (Systems) Ltd reserves the right to change any of this information without notice.
No part of this manual may be reproduced in any form or by any means, electronic or mechanical without express
written permission from Ritelite (Systems) Ltd.
Any type of reproduction or distribution not authorized by Ritelite (Systems) Ltd represents an infringement of valid
copyrights, and violators will be prosecuted. We expressly reserve the right to make technical modifications, even
without due notice, which aim at improving our products or their safety standards.
Advertisement
Table of Contents
Related Manuals for Ritelite K21
Summary of Contents for Ritelite K21
- Page 1 No part of this manual may be reproduced in any form or by any means, electronic or mechanical without express written permission from Ritelite (Systems) Ltd. Any type of reproduction or distribution not authorized by Ritelite (Systems) Ltd represents an infringement of valid copyrights, and violators will be prosecuted. We expressly reserve the right to make technical modifications, even...
-
Page 2: Important Safety Instructions
UNIT SERIAL NUMBER This information can be found on your K21’s product label on the light head. You will be required to supply the products serial number when contacting Ritelite (Systems) Ltd or one of Ritelite’s approved dealers about parts and service. -
Page 3: Table Of Contents
PAGE NUMBER Section 1: Introduction & Applications for use Section 2 : Safety Rules Section 3: Technical Specifications Section 4: Setting up the K21 Section 5: Operating Instructions 5a) Pre-operation inspection 5b) Unit Stability Deployment Process 5c) Breaking Down Operation... -
Page 4: Section 1: Introduction & Applications For Use
Section 1: INTRODUCTION & APPLICATIONS FOR USE The K21 is designed as a simple to use but powerful portable LED lighting system. It should only be used as a device to provide light as designed and for no other purpose. -
Page 5: Section 2: Safety Rules
The Manufacturer, Ritelite (Systems) Ltd cannot anticipate every possible circumstance that might involve a hazard. The warnings in this manual and on labels affixed to the K21 will therefore not cover every eventuality. If using a procedure or operating method not specifically recommended by the manufacturer then the user must verify that it is safe for others and that it does not make the equipment unsafe. -
Page 6: Fall Hazards
TIP OVER HAZARDS IF USING A MAST, TRIPOD, OR ANY DEVICE TO SUPPORT THE K21 AT HEIGHT • Do not raise the mast until the K21 system is positioned level on a firm, flat, horizontal surface with all support legs correctly deployed and locked. •... -
Page 7: Electrocution Hazards
• Do not use the K21 system on a moving or mobile surface or vehicle. • Do not use the K21 system for any purpose other than that for which it is designed. ELECTROCUTION HAZARDS • Maintain safe distances away from electrical power lines in accordance with applicable governmental regulations. -
Page 8: Crushing Hazards
Ensure the K21 system is set up on a firm and horizontal flat surface. • Do not raise the mast until the K21 system is positioned level on a firm horizontal flat surface with all support legs correctly deployed and locked. -
Page 9: Section 3: Technical Specifications
The manufacturer shall not be liable for any changes made to the device nor for any damage resulting from such changes. • The K21 is not designed to be setup / used on a live public highway. Section 3: TECHNICAL SPECIFICATIONS K21 WEIGHTS / DIMENSIONS WEIGHT 5.3Kg... -
Page 10: Section 4: Setting Up The K21
Arrange the angle of the light heads as far as possible to ensure that the light heads are not likely to dazzle people in the near vicinity. Set the K21 system up in such a way that it cannot obstruct walkways or areas that form emergency exit routes. -
Page 11: Section 5: Operating Instructions
Section 5: OPERATING INSTRUCTIONS Do not use the K21 for any purpose other than that for which it is designed – as a mobile floodlighting system. If more than one operator is expected to set up or use a K21 lighting system at different times, each operator is required to follow all safety rules and instructions in the operators manual. -
Page 12: 5B) Unit Stability Deployment Process
If necessary raise light head to required working height. 3. Connect the mains input lead to the K21. Observe the local voltage is correct to match the input range of the LED driver (100-277V AC) and... - Page 13 30 degrees in either direction. 30º 30º View from above mounted to twin head bracket This light plot shows a typical application. The rail site is 150m long by 16m wide. 4 x K21 units are used per each of the three sections below.
-
Page 14: 5C) Breaking Down Operation
5c) BREAKING DOWN OPERATION Breaking down the K21 to put it away is a reverse of the setting up operation. 1. Switch off power to the K21 and disconnect the power cable. 2. Slacken off knob of the K21 where it attaches 3. -
Page 15: 5D) Packing Away And Transport
K21 weight. See the serial plate on the K21 components for their exact weight. • The K21 must be secured to the transport vehicles with chains or straps of ample load capacity. Section 6: MAINTENANCE •... -
Page 16: Disclaimer Of Warranty
The use of spares other than original parts from Ritelite (Systems) Ltd will invalidate any warranty. ADVICE ON DISPOSAL OF RITELITE PRODUCTS AT END OF LIFE For our latest advice on the disposal of Ritelite products at end of life please visit the link below. https://www.ritelite.co.uk/disposal-advice DISCLAIMER OF WARRANTY For details about the warranty offered on Ritelite products please visit the link below. -
Page 17: Section 7: Optional Extras
Section 7: OPTIONAL EXTRAS PRODUCT CODE DESCRIPTION PREVIEW K20-T4M All terrain tripod K20-MB K21 magnetic bracket K20-MBQ K21 heavy duty magnetic bracket K20-TAB K20 twin head adaptor K20-SB K21 scaffold bracket... -
Page 18: Section 8: Spare Parts
Section 8: SPARE PARTS PRODUCT CODE DESCRIPTION PREVIEW SLK21-SP01 Spot beam lens array SLK21-SP02 Wide beam lens array SLK21-SP03 LED Module (Spot) complete without lens SLK21-SP04 220W LED Driver With Loom For LED Modules SLK21-SP05 Mounting stirrup yellow c/w locking knob SLK21-SP06 110V plug / coupler with wiring assembly SLK21-SP07... - Page 19 PRODUCT CODE DESCRIPTION PREVIEW SLK21-SP08 Locking knob for mount SLK21-SP09 240V plug / coupler with wiring assembly SLK21-SP10 LED Module (Wide Beam) Complete Without Lens...
- Page 20 The contents of this manual are subject to change without prior notice. We take no responsibility for errors or admissions. Ritelite (Systems) Ltd Meadow Park, Bourne Road, Essendine, Stamford, Lincolnshire, PE9 4LT, UK Tel. +44 (0) 1780 758585 E-mail. sales@ritelite.co.uk www.riteliteportablelighting.co.uk RI-86 V1 220209...
Need help?
Do you have a question about the K21 and is the answer not in the manual?
Questions and answers