Page 1
OWNER’S MANUAL PalletPal Low Profile Disc Turntable Model # ______________________________________ Serial # ______________________________________ Date placed in Service __________________________ SOUTHWORTH PRODUCTS CORP P.O. Box 1380 • Portland, ME 04104-1380 Telephone: (207) 878-0700 or (800) 743-1000 Fax: (207) 797-4734 www.SouthworthProducts.com Email: service@SouthworthProducts.com...
Page 2
Please note: This manual was current at the time of printing. To obtain the latest, most updated version, please contact South- worth’s Customer Service Department or go to our website: www. SouthworthProducts.com, under E-Parts & Service you will find a complete list of current owner’s manuals to print.
It is the responsibility of the user/purchaser to advise the manufacturer where deflection may be critical to the application. Repairs All repairs shall be made by qualified personnel in conformance with Southworth’s instruc- tions. Operators Only trained personnel and authorized personnel shall be permitted to operate the lift.
(Blue Background) SAFETY INSTRUCTIONS (or equivalent) signs indicate S A F E T Y safety-related instructions or procedures. I N S T R U C T I O N S (Green Background) 4 PalletPal Low Profile Disc Turntable...
Page 5
Installation The rotating platform bears on two (2) concen- It is important that your new PalletPal Disc tric rings of seated ball bearings. If the platform Turntable be unskidded and installed properly. starts rotating with increased difficulty, it may...
Labor is not included. This is buyer’s sole remedy. Except as stated herein, Southworth Products Corp will not be liable for any loss, injury or damage to persons or property, nor for direct, indirect, or consequential damage of any kind, resulting from failure or defective operation of said product.
Page 8
Southworth is the world class supplier of products designed to improve productivity and enhance safety. Our staff has over 400 years of engineering experience. If one of our standard products does not meet your needs, our engineers can custom design equipment specifically suited to your material handling application.
Need help?
Do you have a question about the PalletPal and is the answer not in the manual?
Questions and answers