Specifications - DCS BGS-1230 Installation Manual

SPECIFICATIONS

B
B
WALL MOUNT LOW BACKGUARD INSTALLATION
1. Locate and level range per installation instructions.
2. After unpacking all backguard system parts, locate the Back Section 1/8" above and centered over the Island Trim
attached to the range.* Secure Back Section to wall with the appropriate fasteners (not supplied)(fig. 01).
*After 1/8" is located, slots in back section may be used to adjust spacing between range island trim and
backguard for a flush fit.
3. Secure Front Section of backguard to Back Section with #8 self-tapping sheet metal screws supplied
(fig. 02).
12 "
A
A
Slots to choose desired spacing
between Range Island Trim and
Backguard.
Back Section
Island
Trim
Fig.01
8-3/4 "
MODEL
BGS-1230
BGS-3030
1-5/16 "
BGS-1236
BGS-3036
BGS-1248
BGS-3048
1-5/16 "
3
A B
RACK
(13-5/8")
QTY.
29-7/8" 10-1/8"
29-7/8"
28-1/8"
35-7/8" 10-1/8"
35-7/8" 28-1/8"
47-7/8" 10-1/8"
47-7/8" 28-1/8"
Front Section
Back Section
Fig.02
RACK
(16-5/8")
QTY.
-
-
2
-
-
-
-
2
-
-
2
1
# 8
Self-tapping
sheet metal
screws