Table of Contents
Advertisement
5
Click [Finish].
Reboot your computer after the screen closes.
6
Turn your camera off and plug the provided USB cable
into your camera and into an available USB port on your
computer.
Confirm that the USB Connection mode is set to [PC] before
connecting the USB cable. (1p.16)
7
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO MX] (Windows XP) or [Search
for the best driver for your device (Recommended)] (Windows 98/
98SE/Me/2000) in the task bar recognized area to begin the
installation.
8
Double-click [My Computer] on the desktop.
When the installation is completed, your camera can then be found
in the [My Computer] window as [Removable Disk].
Make sure that [Removable Disk] is displayed in the [My computer]
window.
In the case of Windows XP, if the SD Memory Card has a volume
label attached, the volume label name will be displayed instead of
[Removable Disk]. If the SD Memory Card is new and has not been
formatted, the manufacturer and capacity of the card may be
displayed.
9
Advertisement
Table of Contents
