Advertisement
INSERT 1
SCREW HOLE
INSERT 4
BOTTOM PIN OF TRIM
Stainless Steel Care
This Trim Kit is made of stainless steel. Use the mildest cleaning procedure first. Start with hot soapy water,
rinse and dry. If the trim kit has food soil remaining, try a general kitchen cleaner, such as Fantastik®, Simple
Green® or Formula 409®. Apply cleaner with a damp sponge, rinse thoroughly and dry. Always scrub lightly
in the direction of the grain. Do not use a steel wool pad, it will scratch the surface. To touch up noticeable
scratches in the stainless steel, sand very lightly with dry 100 grit emery paper, rubbing in the direction of the
grain. After cleaning use a stainless steel polish, such as Stainless Steel Magic®.
HORIZONTAL CLIP
ORIENTATION
ON MOUNTING
BRACKET
TOP PIN
OF TRIM
MOUNTING
BRACKET
SUPPORT
TRIM KIT
ASSEMBLY
INSERT 3
CABINET
FLANGE
SCREW HOLE
25 3/4" +1/16"-0"
INSERT 2
TRIANGULAR
CENTERING
NOTCH
LOCATE MOUNTING BRACKET
IN BOTTOM CORNERS
OF CUTOUT
1/8" HOLE FOR
MOUNTING
SCREW
CENTER
LINE
CABINET CUT-OUT:
BASE
17" +1/16" -0"
HORIZONTAL
CLIP ORIENTATION
ON BASE
Advertisement
