Download Print this page

Advertisement

Quick Links

Corsica Product Guide
Evita Sinks

Advertisement

loading
Need help?

Need help?

Do you have a question about the Corsica Evita Series and is the answer not in the manual?

Questions and answers

Summary of Contents for CABINETS TO GO Corsica Evita Series

  • Page 1 Corsica Product Guide Evita Sinks...
  • Page 2 3. Check before washbasin installation The support bars must be placed on both sides of the washbasin as per Step 2. Cabinets to Go recommends a maximum distance of 120 + 5 cm [48” + 2”] between them. The support bar has been tested with a weight of 150 Kg [330 lb].
  • Page 3 4. Washbasin installation Seal the joint between the washbasin and the wall with anti-mould silicone. Smooth the silicone bead and let it NOTE: The faucet and drain valve can be installed before or dry for at least 24 hours. after the washbasin, whichever is easier. Before placing the washbasin, apply anti-mould silicone on the upper side of the support bars and the back edge of the countertop.
  • Page 4 Installation on a Bathroom Cabinet 1. Washbasin installation Clean the joint between the washbasin and the wall with a degreasing agent such as alcohol, acetone or other suitable agent. Clean the rest of the washbasin surface. NOTE: The faucet and drain valve can be installed before or after the washbasin, whichever is easier.
  • Page 5 Annex: Recommendations for the Arrangement of the Support Bars The following are recommendations for the arrangement of support bars in some of the most common washbasin cases: • L < 120 cm [48”] (Single Basin): 2 Support Bars Up to 120 cm [48”] d: Distance between the side of the washbasin and the axis of the support bar.
  • Page 6 Use a scraper and a solvent (which does not contain For cleaning Corsica Quartz and Corsica Premiere Ultra dichloromethane) and rub gently with a non-abrasive scouring Compact surfaces, Cabinets to Go recommends the use pad (e.g. Scotch-Brite). Then rinse with plenty of water and dry. of Q-Action ®...
  • Page 7 Cleaning Corsica Premiere Corsica Quartz Ultra Compact XGloss Precautions Surfaces (Ultra-Polished) • Do not place outdoors or in places exposed to direct UV radiation. Due to its ultra-shiny surface, it is recommended to use Q-Action (or a similar product) with a sponge or microfibre •...
  • Page 8 Corsica Premiere Particular attention should be paid to corrosive and caustic products which could affect Corsica Quartz surfaces due to Ultra Compact Precautions their aggressiveness. • Do not polish the surface. These include dark hair dyes, strongly aggressive bathroom cleaning products, dark shoe creams, depilatory creams, •...
  • Page 9 1st November 2018. by Cabinets to Go Cabinets to Go reserves the right not to offer the warranty service free of charge if the requirements set out in this Warranty are not met, or if the information provided by the end Cabinets to Go guarantees the registered end user its end user is false, incomplete or illegible.registered online on the...