Prorack PR3111 Manual

First Time Installation
• Please read instructions carefully before installation.
• Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
• Clean your roof racks prior to fitting the Awning Bracket and Kit.
Important Warning
• It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
• You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage.
• If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a roof rack specialist.
Contents
Installation onto Prorack Heavy Duty, Trade and other Heavy Duty Crossbars
Go to Page 2
Installation onto Prorack Aero and International T-Slot Crossbars
Go to Page 3
Kit Contents
Item Component
1 Awning Bracket
2 M8 Spring Nut
3 M8 T-Nut
4 M8 Washer
5 M8 Spring Washer
6 M8 Socket Head Capscrew 25 mm
7 M8 Socket Head Capscrew 20 mm
8 M6 Hex Bolt
9 M6 Washer
10 M6 Nylock Nut
8
6100010211-Rev1
Awning Bracket and Kit
Qty
2
4
4
8
4
4
4
4
4
4
7
9
Tools Required
•
•
•
5
10
Tape Measure
10 mm Spanner or Torque Wrench
(for Standard Bar fitment only)
6 mm Allen Key or Torque Wrench
6
4
2
PR3111
3
Page 1 of 6