Changing The X-Changeable Cover Tm - Panasonic EB-MX7 Operating Instructions Manual

Changing the X-Changeable Cover
Note: X-Changeable Cover is only available for VS7.
Before changing the cover, always switch off the power and
disconnect the phone from the charger or any other device. For your
safety, follow these procedures when removing or attaching the
cover.
Removing the cover
Loosen and remove the 4 screws with the screw driver included in
this package and then gently remove the cover.
Attaching the cover
Place the cover right in the hollow in the
phone and align the bottom edge of the cover
with that of the hollow. Tighten the 4 screws
firmly.
Ensure that there is no dust caught between
the cover and the hollow.
Note: Do not use the phone without the cover attached.
Do not force the cover when removing or replacing. Before tightening the
screws, ensure the cover is located correctly. Do not force or over tighten the
screws.
Use only covers designed for this model.
Appendix
TM
157