Table of Contents
Advertisement
Quick Links
MODEL GL110
COUNTERTOP PATHOLOGY
WORKSTATION
CAUTION
• Inspect unit and all components
for any loosening that may have
occurred during shipping •
ATTENTION
Review entire manual before
starting assembly
ATTENTION
All images and Drawing in this manual
may not represent your model.
Refer to your particular project for
exact specifications
Mortech™ Manufacturing Inc.
411 North Aerojet Avenue, Azusa, CA 91702
(626) 334-1471 www.mortechmfg.com
Technical Users' Manual
Installation and Operating Instructions
CAUTION
DO NOT USE CLEANERS
•
CONTAINING CHLORINE WHEN
CLEANING STAINLESS STEEL
WARNING
Biohazard Label is place on the
equipment signifying the potentially
infectiousness due to the samples
or reagents
ISO Doc. #OMGL110 (REV F)
•
JULY 2013
Advertisement
Table of Contents
Summary of Contents for MORTECH GL110
- Page 1 Technical Users’ Manual Installation and Operating Instructions MODEL GL110 COUNTERTOP PATHOLOGY WORKSTATION CAUTION CAUTION • Inspect unit and all components DO NOT USE CLEANERS • for any loosening that may have CONTAINING CHLORINE WHEN occurred during shipping • CLEANING STAINLESS STEEL •...
-
Page 2: Safety Information
• Is unit draining properly? WARNING • Are all nuts, bolts, and pins secured in place? It is crucial that any work performed on Mortech Mfg. Inc. If unit has an issue contact customer relations. manufactured items are carried out exclusively by skilled INSTRUCTION FOR HANDLING professionals who have the respective training. -
Page 3: Installation
GL110 Countertop Pathology Workstation Installation PLUMBING CONNECTION INSTRUCTIONS Figure-G STEP 1: (Refer to Figure-G) Flush out all water lines prior to connection. Debris may be in the lines from construction process. Install shut off valves on each water line. Lines are clearly marked RED for hot and BLUE for cold. - Page 4 GL110 Countertop Pathology Workstation Plumbing MODEL GL110 PLUMBING Exhaust Duct 1-1/2-Drain Electrical Conduit Cold Water Hot Water JULY 2013 MFGISO DOC. #OMGL110 (REV. F)
-
Page 5: Parts Listing
GL110 Countertop Pathology Workstation Parts listing Main Power Disconnect To Be INCOMING MAIN Recommended or Supplied: ELECTRICAL POWER POWER DISCONNECT (CONDUIT) a. Waterproof load center with 1 circuit breaker disconnect with a 15 amps fuse (Circuit One) and a point of contact for the unit to be installed. -
Page 6: Optional Accessories
GL110 Countertop Pathology Workstation Parts listing EXHAUST VENTILATION LIGHT SWITCHES (MAGNIFIER & FLUORESCENT) TURNING ON/OFF INCANDESCENT LIGHTS NALGENE® RECTANGULAR CARBOYS w/SPIGOT #67114 (3) LED LIGHTS C-FOLD PAPER TOWEL HOLDER HOT/COLD MIXING FAUCET w/WRIST BLADE HANDLES ENCORE FAUCET #KN57-4000-WH SINK BASIN... -
Page 7: Troubleshooting
GL110 Countertop Pathology Workstation Electrical EXHAUST VENTILATION LIGHT SWITCHES (MAGNIFIER & FLUORESCENT) TURNING ON/OFF INCANDESCENT LIGHTS NALGENE® RECTANGULAR CARBOYS w/SPIGOT-DEPRESS (3) LED LIGHTS C-FOLD PAPER SPIGOT TO RELEASE FORMALIN TOWEL HOLDER HOT/COLD MIXING FAUCET w/WRIST BLADE HANDLES (USE HAND CONTROLS TO... - Page 8 GL110 Countertop Pathology Workstation Accessories PATHOLOGY STATION BASES (Optional) GL125 GL120 Model GL120 and GL125 Pathology Station Bases Grossing Station Table Bases feature all heavy-gauge Type 304 stainless steel construction with No. 4 satin finish. Adjustable leveling feet are provided on all corners. Units are custom fabricated to each customer’s specifications.
- Page 9 Self Contained Fireproof cabinet Ventilation System Plexiglass Shield Spray Hose Assembly SS cabinet Camera Mount Mortech Replacement Filters Flex Arm Magnifier Light Air and Gas Valve Microphone on Flex Arm Glove Box JULY 2013 MFGISO DOC. #OMGL110 (REV. F)
-
Page 10: Product Features
120/277 Volt HP Rating: 1HP-120V 2HP-240V-277V Max Amp: 16 Amp Termination: Side Actuator Material: Thermoplastic Body Material: Thermoplastic Strap Material: Steel Standards and Certifications: UL/CSA 110V 220V Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... -
Page 11: Technical Specifications
Markings The outer surface of the conduit shall be clearly marked with a legible print legend in accordance with UL 1660 and CSA C22.2 No. 227.2. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... - Page 12 • Light Source : ............LED • Maximum Bulb Wattage : ........9 Wl • Product Weight (lb.) : 1.21 lb • Recommended bulb type : ........LED Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 13: Material Characteristics
RESET LINE LINE LINE LINE: cable brings power to the GFCI Service Panel Mortech™ Manufacturing Inc. Grounding connection 411 North Aerojet Avenue, Azusa, CA 91702 to box ( if box has a grounding terminal) LOAD LOAD (626) 334-1471 www.mortechmfg.com Wire... - Page 14 • Patented Quick-Fit™ Key Hole Mount for Easy Installation • Patented Universal-Fit™ Adapter Technology • Lockable Tab • Premium Powdercoat Finish • Spring Hinge Closure • UL Listed & 2008 NEC Compliant Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 15 • 2-power, high clarity magnification. • Optional 4-power, 1” diameter secondary lens inset available **. • Color: Black. • 2” x 4” dual lens, shade mount attachment Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 16: Agency Certifications
Bracket - Actuator WBL/MBL optional external gasket panel seal Base Phenolic (150°C) Rocker/Bracket Nylon 66 (105°C) Agency Certifications Select circuits and constructions with IEC approvals are avail- able. Consult factory. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... -
Page 17: Component Data
20 x 15 x 0.50 thick LW389 All measurements in inches LW386 LW387 LW385 LW389 Mortech™ Manufacturing Inc. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com (626) 334-1471 www.mortechmfg.com... - Page 18 Component Data HOT/COLD MIXING FAUCET ENCORE WALL MOUNT FAUCET Model #KN57-4000 WH ENCORE WALL MOUNT FAUCET Model #KN57-4000 WH Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 19 Leakproof. Carboy is made of autoclavable polypropylene, with polypropylene screw closure. Before autoclaving, just set cap or closure on top of the container without engaging the threads. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
-
Page 20: Operation
400 C-fold or 525 multifold paper towels without adjustment or use of adapters. Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request. Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com... -
Page 21: Maintenance Instructions
GL110 Countertop Pathology Workstation Maintenance one that does not contain chlorine, such as acetone, methyl alcohol, and mineral spirits. MAINTENANCE INSTRUCTIONS EFFECTIVE CLEANING METHODS The unit requires regular maintenance and follow the Commercial Cleaners - Many commercial cleaners manufactures directions. -
Page 22: Maintenance Record
GL110 Countertop Pathology Workstation Maintenance record MAINTENANCE RECORD Date JULY 2013 MFGISO DOC. #OMGL110 (REV. F) -
Page 23: Training Record
GL110 Countertop Pathology Workstation Training record TRAINING RECORD Date MAY 2012 MFGISO DOC. #OMGL110 (REV. E) -
Page 24: Warranty
Information in this Manual is subject to change without notice of (18) months from the date of shipment. Shipping and and does not represent a commitment on the part of Mortech Labor is not warranted. Items not manufactured by Mortech Manufacturing.
Need help?
Do you have a question about the GL110 and is the answer not in the manual?
Questions and answers