Continuous improvement of the quality of our products is the main purpose of the work of our technicians. For this reason, ZINCO GROUP reserves the right to modify, without prior notice, the technical characteristics of its products, without the need for changes to be made on products already placed on the market.
GENERALITY In some cases, we find ourselves solving the problem of fume or air draught from equipment without an air intake and installed in closed environments almost hermetically by increasingly sealing fixtures. In these cases, the electric fan can solve the problem. The electric fan with an exclusive design that we offer is a roof draught activator designed in detail for its efficiency and safety.
ASSEMBLY INSTRUCTIONS After removing the packaging, make sure that the appliance is intact, if in doubt do not use the appliance and contact professionally qualified personnel. The package contains: 1. 1 Electric fan 2. 4 fixing brackets (Optional adapter on request for round systems) 3.
Attention The use of any electrical appliance requires compliance with certain basic rules: In particular, do not touch the appliance with wet or damp hands or feet. Do not use the appliance barefoot. Do not allow children or the incapacitated to use the appliance. Connect the electric fan, with a suitable electric cable, to the speed regulator (M).
TROUBLESHOOTING Type of event Solution Freshly mounted, it does not It is normal if for the first few It just depends because it's start at low speeds days he is unable to start at new, start it at high speeds and then pass it on to low No.
2. For the warranty to be valid, the consumer must comply with the instructions on routine maintenance and use of the electric fan. 3. ZINCO GROUP declines all responsibility for any direct or indirect damage resulting from failure to comply with the requirements indicated in point 2, as well as anything else indicated in this use and maintenance manual.
Z.I. C.da Cammarata – 87012 Castrovillari (CS) – Italy ZINCO GROUP States under its own responsibility, that this E10 model electric fan bears the CE marking as it is manufactured in compliance with the following EU directives and their subsequent amendments: • 73/23/EEC Low Voltage •...
INFORMATION FOR COMPATIBLE ENVIRONMENTAL DISPOSAL This product complies with EU Directive 2002/96/EC The crossed-out wheeled bin symbol on the appliance indicates that the product, at the end of its useful life, must be treated separately from household waste, and must be taken to a separate collection point for electrical and electronic equipment or returned to the retailer when purchasing a new equivalent appliance.
TECHNICAL DATA Parameter Value Description Electric fan for roof-mounted applications, which can be installed on square and round evacuation ducts, with high performance even in adverse weather conditions. Also, particularly suitable for the extraction of hot fumes at high temperatures, even in continuous service.
Need help?
Do you have a question about the E10 and is the answer not in the manual?
Questions and answers