Advertisement
Quick Links
Advertisement
Summary of Contents for Crunch CREQ7B
- Page 1 Operator’s Guide CREQ7B...
- Page 2 Thank you for purchasing the CRUNCH CREQ7B, 7-Band Equalizer/ two-way crossover. This unit has both a pre-amp equalizer and crossover to provide the multi-speaker system of your vehicle with improved sound performance. Please read the entire manual to ensure proper connections and application.
- Page 3 MOUNTING 1. Select the desired mounting location, either under the dash or in the dash. Make sure that there is adequate depth for the CREQ7B. 2. Use the mounting brackets and hardware provided. Make sure there is proper clearance for the mounting bracket screws when attaching under the dash.
-
Page 4: Functions And Operations
Functions & Operations Volume Control: The audio level (volume) can be increased or decreased with this illuminated VOLUME control knob. Fader Control: Allows to control the front and rear output levels. Subwoofer Control: The Subwoofer output level is controlled by the SUB illuminated knob. - Page 5 Functions & Operations...
- Page 6 Aftermarket Unit Setup...
- Page 7 Factory Unit Setup...
-
Page 8: Diagnostics And Troubleshooting
Fuses chassis will cause the main fuse to blow. Blowing 3) If the CREQ7B is blowing fuses continually with only +12 volt, ground and remote leads connected, the unit may be faulty. 1) Check all fuses. 2) Check all connections. -
Page 9: Specifications
Ticking or 1) This problem could be caused by radiation pickup of RCA cables that are too close to a fuel pump or a distributor. Whine that 2) Check that the head unit ground is connected straight to the changes vehicle chassis and does not use factory wiring for ground. - Page 10 Maxxsonics, LLC. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. Crunch products are designed and engineered in the USA by www.maxxsonics.com CR CREQ7B QSG 01 - rev1...
Need help?
Do you have a question about the CREQ7B and is the answer not in the manual?
Questions and answers