Table of Contents
Advertisement
■
PC menu setting
(changed as desired)
•
Making settings
"How to Use Menu Functions"
Menu
Item
Normal
Sync
Dot clock
H-position
PC
adjust
V-position
Clock phase
Input
resolution
H-frequency
V-frequency
•
Audio menu (p. 30)
•
For PC input, only audio signals can be output from PROG OUT terminals.
to
Adjustments/Configurations (options)
Resets PC adjust (Set/No)
•
H & V: The H and V sync signals are input from the HD/VD connector. (p. 55)
•
On G: Uses a synchronized signal on the Video G signal, which is input from the G
connector. (p. 55)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
blurred.
Adjust the horizontal position.
Adjust the vertical position.
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
Note
Switches to wide display.
•
Input signal switched from VGA to WVGA
•
Input signal switched from XGA to WXGA
Displays the H (Horizontal)/V (Vertical) frequencies.
•
Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
(p. 30)
29
Advertisement
Table of Contents
