Panasonic Viera TC-26LE60 Operating Instructions Manual page 19

Automatically searches and adds receivable channels to memory.
Select "ANT In"
(Select Cable or Antenna)
Select All or Analog
Select "Mode"
All: Analog and digital
Analog: Analog only
Auto program
ANT In
Cable
Mode
All
Start scan
Use this procedure when changing setting of receiving channels or changing the channel display.
Also, use to add or delete channels from channel list manually.
Select "Edit"
Edit Apply
Favorite Add
- - - No
Select the item to be edited
Edit Apply
CH Caption Favorite Add
1 - - - - - - No
2 2 Yes
3 - - - - - - No
4 - - - - - - No
5 - - - - - - No
Caption Favorite
Add
•
Caption:
Changes the station identifier
•
Favorite:
Registers channel to Favorites List
•
Add:
Adds or deletes channels
Check the signal strength if interference is found or freezing occurs on a digital image.
Signal meter
CH 2 - 1
Signal strength
Current 85 %
Peak level 85 %
•
If "Channel lock" (p. 16) is activated and "Auto", "Manual" or "Signal meter" is selected, "Enter password." will be displayed.
set
select
select
next
select item to edit
(Caption/Favorite/Add)
next
change channel
ok
Signal intensity
Select "Start scan"
Settings are made automatically
start
•
After completing the setting,
select "Apply". (see below
select
•
All previously memorized
channels are erased.
Edit
•
Caption
Apply
Caption select
---
Preset
Caption detail
Preset
Select the station identifier
Caption detail
Rename (maximum 7 characters available)
•
Favorite
Apply
Favorite
Favorite
12
Favorite
Select the number
•
Add
Press "OK" button to select "Yes (add)" or "No
(delete)"
Select "Apply"
Press to move cursor to "Apply"
•
If the signal is weak, check the antenna.
If no problem is found, consult your
local dealer.
Note
•
Not available if "Cable" is selected in "ANT In"
(see above).
•
Effective only for digital antenna channels.
).
select
set/next
select
next
ok
(to enter your
program)
19