Summary of Contents for Saeyang MARATHON N2
- Page 1 Instructions for use MARATHON N2 MILLING MACHINE Importer: ACTIVESHOP SP. Z O.O. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl...
- Page 2 Rev. A/04/2024...
- Page 3 Introduction • The device should be used in a dry, closed room. • Remember never to drop the milling machine, this will cause damage to the ball bearings, which will affect the life of the motor. • Do not allow any liquids to get inside the device. •...
- Page 4 Use the dial to set the selected head speed. Pressing the "forward/reverse" switch will change the direction of rotation of the head. Foot service Turn on the device Make sure the manual/leg mode switch is in the Foot position. Use the dial to set the selected head speed. In foot control mode, the head will operate within the limits of the set speed.
-
Page 5: Security Measures
check whether the voltage change button (No. 12 in the diagram) is set to 220V. If not, and the milling machine is plugged in, the milling machine has been damaged - contact Activeshop service for repair against payment. The head is overheating. check that Twist-Lock is properly closed Note - the cutter should be changed after turning off the milling machine with the switch (No. -
Page 6: Disposal Of The Device
DISPOSAL OF THE DEVICE Dispose of used electrical appliances, fixtures and packaging to raw material reprocessing centers in accordance with environmental protection principles. Electrical appliances should not be disposed of in household waste containers. Follow the rules for discarding this type of equipment. In order to protect the environment in accordance with Directive 2012/19/EC on waste electrical and electronic equipment, used equipment Electrical equipment should be collected separately, and taken to collection points for waste electronic and electrical equipment.
Need help?
Do you have a question about the MARATHON N2 and is the answer not in the manual?
Questions and answers