[Audio Dub.]; Adding Audio After Taking Pictures - Panasonic Lumix DMC-TZ1 Operating Instructions Manual

Menu Settings
∫ Single setting
1 Press 2 1 to select the picture
and then press 4 to set/cancel.
PROTECT THIS
SELECT
SET/CANCEL
SET The protect icon [
CANCEL The protect icon [
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
"[DPOF PRINT] Setting the picture to print
and the number of prints". (P84 to 85)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted. (P91)
• Even if you do not protect pictures on an
SD Memory Card, they cannot be deleted
when the card's write protect switch A is
set to [LOCK].
• The following functions cannot be used
with protected pictures.
– [ROTATE]

– [AUDIO DUB.]

86
VQT0V40
100 _ 0001
1/3
MENU
EXIT
] appears.
] disappears.
2
[AUDIO DUB.]

Adding audio after taking pictures

MENU
Press [ ] to display the [PLAY] mode
SET
menu and select the item to set. (P80)
You can add the audio after taking a
picture.
1 Press 2 1 to select the picture
and then press 4 to start audio
recording.
AUDIO
DUB.
SELECT
START
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press 3 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
• Audio dubbing may not work properly
on pictures recorded by other
equipment.
2 Press 4 to stop recording.
AUDIO
DUB.
• The audio recording stops
automatically if 4 is not pressed after
about 10 seconds.
3 Press [MENU/SET] twice to close
the menu.
100 _ 0001
1/3
MENU
EXIT
100 _ 0001
1/3
STOP