Mattel Wheels Tyco R/C STUNT SCOOTER Instructions Manual

Keep these instructions for future reference: they contain important information.
GET STARTED!
Your vehicle has an amazing Gyro Stabilizer that makes it easy to
drive – and lets it perform amazing stunts! The stabilizer safely
spins at high speed inside the rear wheel, and it works like a
gyroscope to help keep your vehicle upright.
1. GET SET!
Energize the gyro stabilizer! Hold the vehicle off the ground and
push the left control control up. Once the stabilizer spins up to
full speed, you'll be able to hear it – and if you twist the vehicle
from side to side you'll really feel it working!
Be sure to hold the vehicle by the rider figure, keeping
your fingers clear of the wheels.
2. LAUNCH IT!
Now gently hand-launch your vehicle. Set it on the ground and
give it a gentle push while pushing the left control up. Now
you're ready for the coolest stunts!
I. CONTENTS
VEHICLE
(1) STUNT SCOOTER Vehicle
STUNT SCOOTER
STUNT SCOOTER
TRANSMITTER
Your transmitter is
equipped with a special
automatic ON battery-
saving feature. Just turn
your vehicle ON. Then
push either transmitter
control and you will be
able to run and control
your vehicle.
CAUTION:
Surfaces
may become hot and cause burns i f
el e ctroni c s get wet. Do not operate
vehi c l e through water or snow.
Left control:
forward &
braking
Flex
antenna
(1) Transmitter
96926-0920
Right control:
turning