Using The Optical Image Stabilizer - Panasonic Lumix DMC-FZ2 Operating Instructions Manual

Using the Optical Image Stabilizer

1,4
2,3
2,3
REC 4 / 4
STABILIZER
OFF
SELECT SET
4
P
OFF
• When too much jitter happens or when taking a picture chasing a moving subject,
it may not be stabilized.
• The stabilizer function may be less effective in the digital zoom zone.
• When taking pictures with slow shutter speed such as night portrait, the stabilizer
function may be less effective.
• When the zoom lever is close to T and the shutter speed is slower than 1/125th,
the jitter alert 2 appears.
• We recommend using a tripod when the jitter alert appears.
• In simple mode [
• Usually, set the stabilizer function to [ON]. Set it to [OFF] in the following cases:
– When you want designedly blurred pictures.
– When you use a tripod.
Recording images (basic)
When using this function, you can minimize
jitter.
[Preparation]
• Set the mode dial except for [
(P25)
1
2
3
4
SETUP
ON
EXIT
MENU
1600
], the stabilizer function is fixed to [ON].
Press the [MENU] button.
Press 3/4 to select [STABILIZER].
Press 2/1 to select [ON]/[OFF].
Press the [MENU] button.
• The menu will disappear.
• Only when selecting [OFF], the
indication [
OFF
38
]/[ ].
] 1 will appear.