FACEMI WALRUS AUDIO CANVAS MONO Manual

WALRUS AUDIO CANVAS MONO (Line Isolator & D.I.)
Item: 63317
•
• EAN: 810424034211
Packaging dimensions: 14.6 x 10.7 x 6.4 cm
•
Weight: 0.44 kg
•
Pictures | Translations
•
Need to know for Retailers
Canvas is Walrus Audio's first line of DI Boxes: Mono & Stereo version available
•
Convert your unbalanced signal into a balanced signal for interfacing properly with e.g. your recording
•
interface or FOH mixer
Select between DI or LI (line isolator) mode
•
DI Mode = for high impedane sources such as E-Guitars or Basses
o
LI Mode = for low impedance line level sources such as Amp-sims (e.g. ACS1) or Keyboards
o
Fully passive – no power required
•
Stompbox format for super easy integration on pedalboard
•
Coolest looking DI Box on the market
•
Full Feature List
Passive Line Isolator and Direct Injection device
•
• Converts ¼" unbalanced input to XLR balanced output
For interfacing with your recording interface or FOH mixer
•
Works perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1
•
Stompbox format for easy integration on pedalboards
•
• Flat frequency response from 20Hz-20kHz
Custom wound transformers for low THD and full frequency response
•
Transformer isolated output
•
Sum switch turns Thru channel into a second input
•
• Pad: Enabled a -15dB input pad (only in D.I. mode) to minimize distortion
Choose between DI- or Line-Isolator-Mode
•
GND Lift: Isolates GND pin on XLR to reduce hum
•
Passive design – no power required
•
Made in the USA
•
FACE BVBA • HOEK 76 - UNIT 301 - 2850 BOOM • +32 3 844 67 97 • H.R. ANTWERPEN 291868 • VAT/TVA/BTW 0448 180 481 • INFO@FACE-BE.EU
| Manual