Subscribe to Our Youtube Channel
Summary of Contents for Pony JORGENSEN 27091
- Page 1 #27091 4" X 7" MEDIUM DUTY WOODWORKER’S VISE SCAN TO VIEW VIDEO SAISIR L’IMAGE POUR VISIONNER LA VIDÉO ESCANEAR PARA VER VÍDEO OWNER'S GUIDE Saddle Brook, NJ 07663 USA ponyjorgensen.com Made in China | Fabriqué en Chine | Hecho en China Rev 2/2023...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Misuse of vise can cause serious injury to eyes, hands, limbs, etc. • To ensure safety, vise must be set up and used properly. • Before setting up and using, read, understand, and follow all instructions as outlined below. When setting up vise: •... -
Page 3: Parts List
PARTS LIST Description Quantity Description Quantity Handle Vise Dog Vise Screw Spring Movable Jaw Washer Fixed Jaw Circlip Guide Bar Washer Finger Bolt Roll Pin... -
Page 4: Mounting Instructions
MOUNTING INSTRUCTIONS 1. With the help of another person or you can Mounting holes for wood screws use some other bar clamps, hold the vise up against the workbench in the desired mounting location. NOTE: If the workbench is less than 2-5/16" thick, use a piece of scrap wood between the vise and workbench as a shim. -
Page 5: Maintenance
If repair is not practical, Pony | Jorgensen may elect to replace the product or refund the purchase price in exchange for return of the defective product. Please contact Pony | Jorgensen by calling 1-800-776-2228 or contact marketing@ponyjorgensen.com.
Need help?
Do you have a question about the JORGENSEN 27091 and is the answer not in the manual?
Questions and answers