Panasonic Lumix DMC-FX500 Operating Instructions Manual page 27

[CALIBRATION]
Calibration is not done if correct position is not touched. Touch the [ i ] mark again.
•
~ [LANGUAGE]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[DEMO MODE]
DEMO
A Jitter detection demonstration
B Movement detection demonstration
•
In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
•
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
•
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•
[AUTO DEMO] has no TV output capability.
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Press [MENU/SET].
2
Touch the orange [r] mark
displayed on the screen in
order with the stylus pen
(supplied) (5 places).
•
A message is displayed once the
position is set.
3
Press [MENU/SET] to finish.
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
¢
[ 繁體中文 ]
/[¢]
¢ Not displayed on DMC-FX500P
Select this to display [JITTER, SUBJ. MOVE DEMO.] or the
camera's features.
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]: The camera's features are displayed as a slide
show.
Preparation
A
B
27
VQT1Q36