Highlight Playback - Panasonic HDC-SD90 Owner's Manual

Highlight Playback

Part that was recognized as clearly recorded is extracted from a long recording, and it can be
played back in a short time with effects and music added.
≥ Highlight playback cannot be used for iFrame
scenes.
1
Touch . (l 26)
2
(Only when you would like to change the settings)
Touch [SET] to select the item to change.
[SCENE SETUP]:
[PRIORITY SETUP]:
[PLAYBACK TIME]:
[EFFECT SETUP]:
[MUSIC SELECT]:
3
Touch [START].
≥ When the [SCENE SETUP] is not changed in step 2, it will play back with the last recorded
date.
4
Select the playback operation. (l 36, 80)
≥ When the playback is finished or stopped, the screen to select [REPLAY],
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not
possible.
∫ Scene setting
1 Touch [SELECT SCENES] or [SELECT DATE].
2 (When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥ Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and
displayed. Touch the scene again to cancel the
operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded
by red. Touch the date again to cancel the operation.
3 Touch [Enter]/[ENTER].
Select the scene or date to be played back.
Select the target to give priority to play back. (l 86)
Select the time to play back. (l 86)
Select the effect for playback. (l 86)
Select the music to be played on playback. (l 87)
ALL
is
85
VQT3J56